Ceramic Foam Filter
Product Details
2) Clean the liquid in the filter box while replacing the filter.
1) When the increase of previous filting hight is more than, the filter is blocked up, so it must be replaced.
.Replacement of the filter
2) When the second round begin, we can start all processes again.
1) When the first round of the continuous casting is completed, the filter and filter box should start to be heated, and keep them in a solution state, so as to prevent the pore be blocked up.
.Application for continuous use
2) Notice: that the temperature increase uniformly when pre-heated
1) Put the filter and filter boxes into a LPG burner or a heater and pre-heat to 700-800 before use
.Pre-heat
3) Be sure to fix the filter well, so we ought to prevent it floating
2) clean the surface of the filter and filter boxes
1) put the filter into the filter house
.Preparation
Now we are going to introduce you the most general application of the ceramic foam filter used for melting Al
6.Application
56.8
7.2-12.5
0.305
584*584*51
23"x23"x2"
43.2
5.3-9.3
0.227
508*508*51
20"x20"x2"
34.2
3.8-6.6
0.160
432*432*51
17"x17"2"
22.8
2.9-5.0
0.122
381*381*51
15"x15"x2"
13.6
1.78-3.0
0.075
305*305*51
12"x12"x12"
6.8
0.9-1.7
0.039
229*229*51
9"x9"x2"
4.1
0.5*0.9
0.021
178*178*51
7"x7"x2"
(Ton AL)
(kg Al/s)
(m2)
(mm)
inch
Typical Drop
Typical Flow Rate
Surface Area
Dimensions
5.Typical Flow Rate Chart
38-42
40
40PPI
28-32
30
30PPI
18-22
20
20PPI
8-13
10
10PPI
Range
Standard Number
|
Pattern 4.The standard and range of the pore number Improve every cast quality. Simplity casting program, it can be used in the program without much skill. Remove metal oxide and non-metal impurity. 3.Effects 6 The filter can be sized according to the customers order, or by customer himself. 5 It has various shapes, such as, plate, hollow cylinder, cylinder and so on. 4 Its heat resistance is good, can be used in a high temperature environment, but this quality depends on the material filted. 3 Low density. 2 It has a uniform three-dimension channel structure. 1 Channel reaches 80-90%, so the contact area is large. 2. Characteristics This ceramic foam filter is a kind of uniform beehive type filter which is made of high purity alumina ,by high temperature sinter with a special foaming technic. 1. Summary
|
- Country:Taiwan
- telephone:886-6-2746999
| A kind of uniform beehive type filter which is made of high purity alumina |
Send inquiry / quota request to Ceramic Foam Filter
Relate products of Ceramic Foam Filter
Ceramic sand filter media New Ceramic Sand Replace Foundry Chromite Sand for Casting is a high heat resistance, low thermal expansion, and spherical artificial casting sand obtained by spray treatment of a high oxidizing raw material in a molten state to recrystallize. ...
Come From HENAN SICHENG ABRASIVES TECH CO.,LTD
Lost Foam Sand ceramic foundry sand ceramsite sand Electric Ceramisite Sand Ceramic Foundry Sand also named ( Ceracite, Fused Ceramite, Ceramic Sand), It is made of high quality materials by arc melting from bauxite, our Ceramic Foundry Sand with reasonable price, the price is ...
Come From HENAN SICHENG ABRASIVES TECH CO.,LTD
Ceramic vacuum filter is a new model high-effect, saving-energy flilteration equipment, which is gathering the machinery-power,micropore ceramic.The material fineness from -200 to -450 meshes and various superfine materials. ...
Come From NanJing Sinonine Heavy Industry Science & Technology Co., Ltd
