50x52x19cm
50x52x19cm
50x52x19cm
50x52x19cm
Pack dimension
18kg
18kg
18kg
18kg
Pack weight
482x434133mm
482x434133mm
482x434133mm
482x434133mm
17kg
17kg
17kg
17kg
Net weight
-15% - +20%
-15% - +20%
-15% - +20%
-15% - +20%
Allowed input voltage range
220VAC, 50Hz
3-phase,
380VAC, 50Hz
3-phase,
220VAC, 50Hz
Single phase,
380VAC, 50Hz
3-phase,
Input voltage
90%
90%
90%
90%
Environment Humility
0~40
0~40
0~40
0~40
Environment Temperature
15~17 kHz
15~17 kHz
15~17 kHz
15~17kHz
Switching frequency
0.1%
0.1%
0.1%
0.1%
Repeatability
0.4%
0.4%
0.2%
0.2%
Accuracy
0.4%
0.4%
0.4%
0.4%
Current ripple
7~30A
7~20A
7~20A
7~20A
Adjustable current
200V
400V
200V
400V
Max. output voltage
30A
30A
20A
20A
Max. output current
STCW32DB
STCW34DA
STCW22DB
STCW24DA
Model
Z --------- input electricity (A means 3-phase 380VAC, B means 1-phase 220VAC)
D --------- digital power supply
Y ---------- Maximum output voltage (4 means 400V, 2 means 200V)
X ----------maximum output current (2 means 20A, 3 means 30A, 4 means 40A)
STCW STCW series CW laser power supplies
Part Number Description: STCWxyDz
There are perfect protection functions such as slow-up voltage, slow-start protection, no voltage or low voltage protection, over current protection, over-hot protection, trigger delay protection, lamp-problem protection, external control and error status record etc.
25PIN computer connector for external control and communication. All the digital ports are opto-electronic insulation.
There are many ports and convenient to connect with computer for remote control.
There are the functions such as trigger delay, lamp-problem interlock, voltage display, error code display, status maintenance etc.
Via micro-computer, automatic control to current setting, logic functions and port communications.
There are the following advantages of our products:
try power supply power supply for to get through more products
The STCW series digital laser power supplies are made for CW lamp-pumped Nd:YAG lasers. |
Measure the current ripple and test the stability of the output current accurately in factory to make sure that the output current meets the requirements of the Kr lamp. l Test in relative humidity 90%. l Temperature test in -10~70 to ensure that it works stably in the ambient ...
Come From Sintec Optronics Pte Ltd