Trimble GCS900 Grade Control System
Product Details
GCS900 Dozer Features:
The Trimble? GCS900 Grade Control System with dual GPS can be installed on dozers for a wide range of earthmoving applications. The Trimble GCS900 on a dozer with dual GPS is a full 3D control
system that puts the site plan - design surfaces, grades and alignments - inside the cab.
- Country:United States
- telephone:1-724-266-1600
| can be installed on dozers for a wide range of earthmoving applications |
Send inquiry / quota request to Trimble GCS900 Grade Control System
Relate products of Trimble GCS900 Grade Control System
Parameter 一、MT full-drive digital puller 1.Model:MTW/MTT/MTP/MTS/MTI/MTM/MTH 2.Drive method:independent stepper motor 3.Lifting method:electromagnetic lifting method 4.Pressure adjustment:spring adjustment 5.Lifting height:small and equal 30mm non-working state(small and ...
Parameter 1.model:MDW/MDP/MDD front flip 2.Drive method:independent stepper motor(large torque) 3.Lifting method:motor lifting method 4.Pressure adjustment:spring adjustment 5.Lifting height:small and equal 15mm 6.Support maximum speed:7000rmp/min 7.Voltage/power:110-240/200w ...
GCS900 Compactor Features: The Trimble? CCS900 Compaction Control System is the first satellite-based positioning solution to offer contractors the ability to compact surface material to a target density and check finished grade accuracy in the same process. Using the advanced ...
Come From Precision Laser & Instruments, Inc
GCS900 Scraper Features: The Trimble? GCS900 Grade Control System with dual GPS can be installed on scrapers for mass excavation applications. The Trimble GCS900 on a scraper with dual GPS is a full 3D control system that puts the site plan - design surfaces, grades and ...
Come From Precision Laser & Instruments, Inc
GCS900 Excavator Features: The Trimble? GCS900 Grade Control System with dual GPS can be installed on excavators with standard buckets or tilt buckets for mass excavation projects. The system uses two GPS receivers and solid state angle sensors to measure the precise 3D ...
Come From Precision Laser & Instruments, Inc
The GCS400 Grade Control System is a dual-control system that controls both the lift and tilt of the machine blade. This is done by connecting two LR410 laser receivers or one LR410 and an AS400 slope sensor to the system. Contractors can purchase the GCS400 or start with the ...
Come From Precision Laser & Instruments, Inc
GCS600 Features: The GCS600 Grade Control System is a highly flexible, cross slope and elevation control system designed to be used on motor graders for fine grading work. The GCS600 uses two AS400 angle sensors and one RS400 rotational sensor to calculate the cross slope of ...
Come From Precision Laser & Instruments, Inc
