APACHE RD 15 c

PACKAGE USING A STRAIGHT RECEIVER CABLE

The RD15 requires either a Coil Receiver Cable [see example above] or a Straight Receiver Cord [see example below] with an optional extension cable also available. The receiver cable will provide power from the BULLSEYE batteries. Power cables using cigarette lighter connection p/n ATI 010983 @ $25 or ring terminals p/n ATI 010987 @ $35 are also available.

The RD15 works with all current models of BULLSEYES and most prior versions. An installation kit containing magnets, mating Velcro strips, double-sided tape and a rubber strap is included. A swivel mount is an optional accessory.

RD15 Remote Display lets the operator view grade information at a convenient location in the cab or from the operator's seat. An LED array displays grade information and tilt / plumb information if available on the receiver (BULLSEYE 5+ and BULLSEYE 6). The RD15 allows a tilt display to be visible on the BULLSEYE 6 receiver not visible when using "stand alone."  The RD15 also allows a temporary offset elevation to be set.

$ 600

Total Package: 

   150

p/n ATI 010973 coil cord   

Required Receiver Cable

    25

p/n ATI 010983 (optional)   

Power Cable, Cigarette Lighter

    75

RD15 Swivel Mount 

PACKAGE USING A COIL RECEIVER CABLE