CO2 Laser Marking Machine

Product Highlights:
Especially good performance for non-metal
Maintenance is easy (Using RF CO2 laser 30W made in USA.Lifespan of the laser is about 20000 hours)
Operation is easy (No Q-switch adjusting)
With the superior galvo system, the scanning speed can reach 7000mm/s(275.6"), and the marking effect is better.
With imported lens, the light spot is smaller, and the process effect is better.
You can choose manual or automatic worktable, put materials on and off when the machine is working to improve efficiency.
You can choose updated equipment and solutions such as ascent-air pump, descent-air pump, honeycomb table, aluminum bar table etc. They promote the customers convenience and security.
Supporting large composite picture, working area to be free from restriction.

Application: It is mainly used to advertisement decoration, art gift, garment, leather, fabric, toy, computerized and clipping, electron element, cutting of template, packing and printing, paper product and other speediness processing industries.

Materials that Can Be Marked: This laser marking machine is suitable for marking number or graphics on nonmetal materials, such as: bamboo, plexiglass, acrylic, cloth, leather, woolens, rubber, paper, etc.

About CO2 Laser Marker: The carbon dioxide laser (CO2 laser) was one of the earliest to be developed invented  in 1964, and is still one of the most useful. Carbon dioxide lasers are the highest-power continuous wave that are currently available. They are also quite efficient: the ratio of output power to pump power can be as high as 20%.
A CO2 laser beam is not easily absorbed by metal, but can easily be absorbed by many organic materials such as wood, acrylic, rubber, etc, while it tends to reflect off of most metal surfaces. It's the different wavelengths of the two beams that are mainly responsible for the different types of materials that they will react with.

Remark:
Laser marking is the practice of using lasers to engrave, etch, or mark an object. Using a beam of light as a tool, marking by laser produces a non-contact mark which results in less wear and tear on tooling and associated costs. There is also less chance for product damage. There are also no consumables and no problems disposing of toxic by-products, as there may be with some methods.
High precision markings are achievable on almost any type of material including gold, platinum, silver, stainless steel, and aluminum, as well as a wide variety of plastics. Trademarks, personalized text, serial numbers, logos, and digital images, or any individual process data, can be produced with laser marking.
Laser marking produces a mark that is crisp, clean and permanent. Lasers are also faster than many conventional methods of product imprinting, providing greater versatility in material choices. Also, the same machine can cut through thin materials as well as engrave on them.
The Laser Medium is the material that exhibits optical gain within a laser. The gain is generated by stimulated emission on electronic or molecular transitions to a lower energy state from a higher energy state reviouslyed stimulated by a pump source.
The Laser Medium rules the main feature of the Laser marker. Generally, we use Diode pump, Yag pump and CO2.

Warranty and Aftersales Serive:
The warranty is valid for 1 year from the goods' arrival at Destination Port.
If there is standard part breaks with quality problem within warranty, buyer mail seller the broken part, seller will send a new part to buyer soon and guide buyer how to change it as has been taught in training.
If Buyer wants Sellers engineer to give training, maintenance or other technical support outside Sellers company, Buyer shall afford the traveling cost, lodging and accommodation of our engineer, and the service of engineer is free.
Specification:

CO2 Laser Marking Machine

CO2 Laser Marking Machine
High laser peak value power
Low power consume