Fiber Laser Marking System

Before Fiber laser, laser marking system normally adopts Continuous or pulse output CO2 laser tube, ND-YAG Laser tube as laser source. Compared with traditional laser source, the performance of fiber laser is more excellent, Radiation angle is 1/4 of Diode-pumped laser tube(more suitable for precise and fine marking); the conversion efficiency of electro-optic is 1/10 of lamp pumped solid laser marker; The average working time can be up to 100,000 hours; Fiber laser is a type of full air cooling, so it doesnt need refrigerant device, freezing water pipe or temperaturecontrol instrument etc., the volume is reduced, energy consumption is decreased, so the use cost of user is much lower than use cost of traditional laser marking system. The pulse of ETL Fiber laser is 10-100KHz repeat frequency working, The volume of the fiber laser which average power output is 10W-20W is only 46*160*250cm, and weight is 10kg; Because laser diode is working in low voltage, the conversion efficiency of electro-optic is up to 70%, and driving power supply can use UPS power supply when the power is shut off, the power consumption is only 160W.

Features:

Extensive material processing, smooth cutting edge and burr-free, avoiding polishing, processing with high speed....