Z4 series dc motor

* motor modelling compact, beautiful. The XianHe capacious, wiring and convenient maintenance

3, a XianHe position, from the side in the base, drive on the right. Also can install according to need or above in the base.
4, motor can be equipped with tachogenerator, etc. In the transmission of attachment
5, motor driving mode for elastic coupling. Unit shall be careful with alignment.
For the radial force transmission mode (belt or gear), it allows bear radial force please examine the consultation.

The following five * cooling mode can also accept orders, but first consultation.
A. high center of 100 to 180 base can be made IC410 closed cold motor.
B. center high 160 to 250 base can be made ICO5 blower motor drive in the side of his cold motor.
C. center high 100-180 base can be made ICO1 motor shaft on fan motor from cold.
D. center high 160-315 base can be made IC666 motor with independent fully empty/air cooler in the motor cooling air circulation.

2 and cooling mode:
The motor cooling mode are series of cold, forced ventilation, he rode in radial equipped with air blower, independent of power supply, and air filter. Motor can be made ICO6, IC17, IC37 three cooling way.
A.Z 4-100 ~ Z4-160, its blower in the drive.
B.Z 4-180 - Z4-450, its blower in transmission
Cristiano GeJi air cooling air needed, and fan motor power for, (see table 1)

Third, introduction to structure
1 the protection and installation, motor structure
A whole series of protection for IP21S type.
B. installation method accords with GB/T997 regulation,

7 and technical data sheet for the efficiency in power rating, rated voltage and speed of efficiency, including loss of excitation, not including the blower loss.

To ensure the reliability of the insulation of excitation system, disconnect excitation circuitry on a field winding resistance, release ends in parallel to prevent self-induction potential. In its value standard excitation voltage is about seven times the field winding resistance (cold). When the excitation voltages above standard voltage, and after release less resistance can, and more than seven times seven times.
5 and Z4 Z4-355-315, and Z4-400 and Z4-450 four base with compensation winding. In the new generation of Z4-250 and Z4-280 two base, with compensation winding derived motor is also possible.
6 and provide a grounding mark of the electrical terminals.

4 and the basic way of motor excitation for his efforts, standard, other 180V voltage of excitation can negotiate excitation voltage.
Motor excitation, allowing forcibly shunt voltage exceed 500V. Motor during normal operation shall not exceed the current rated current.

In the following with rated voltage regulating speed is constant torque. It is no less than the minimum speed regulation 20r/min, still can maintain the rated speed, torque.
4 and the basic way of motor excitation for his efforts, standard, other 180V voltage of excitation can negotiate excitation voltage.
Motor excitation, allowing forcibly shunt voltage exceed 500V. Motor during normal operation shall not exceed the current rated current.

F. the series motor performance with GB/T755 the basic technology of motor.
2, motor 160V rated voltage is standard, 440V. According to the specific conditions can derive 220V and 400V or other voltage.
3, motor rated speed 3,000, 15, 10, 750, 6, 5, 4, 3, 200r/min of nine.
To reduce the armature voltage constant torque control, reduce excitation constant power voltage for speed. Speed range of technical data table saw.

Second, motor performance
1, technical data should be used according to the following data work conditions
A. altitude does not exceed 1000m,
B. surrounding air temperature is not more than 40

DC Motor can also rated voltage is made 160V 110V, 440V, 460V, joined, and rated speed for 3000