Variable Frequency Drive Motors

Analog input wire-break detection

Second acceleration/deceleration setting Jogging Unattended start protection (USP)

Over-voltage suppression at deceleration 3-wire control Analog input selection

External thermistor terminal (PTC)Side-by-side installation Second motor setting

Pure analog monitor output (8-bit, 0-10V DC)

7) Versatile Functions

An RS-485 communication port with Modbus?-RTU protocol is integrated. Easier for network operation.

6)RS-485 Serial Port

Analog input wire-break detection

Unattended start protection (USP)

Jogging

Second acceleration/deceleration setting

Analog input selection

3-wire control

Over-voltage suppression at deceleration

Second motor setting

Side-by-side installation

External thermistor terminal (PTC)

Pure analog monitor output (8-bit, 0-10V DC)

Conformity to global standards. CE, UL,c-UL and c-Tick approvals.

Global Performance

5) Integrated EMC Filter Versatile Functions

An offset frequency can be added to or subtracted from the output frequency when ADD terminal is ON. For example, if output frequency setting is 40Hz and offset frequency is 5Hz, output frequency becomes 45Hz (or 35Hz) when ADD terminal is ON.

4) Analog Setpoint Calculate Functions

Output terminals can be assigned logical operators AND, OR and XOR with RUN, AL and so on. ON and OFF delay times are settable for each output terminal. Allows for more flexible system design.

3) Logic and Output Timing functions

Reverse PID function changes the sign of the deviation value which is the difference between target and feedback values.Upper and lower limits from a target value can be imposed on the inverter output frequency.

2) Improved PID Control

the switch changes the sources to the control terminals.

Run command/frequency source are easy to select with a DIP switch. Default is keypad settings. Sliding

1) Operation Source Switch

Capacity Range: 0. 2-7. 5 KW
Global Standards to CE, UL, c-UL, C-Tick and CSA