After the pulsation line with stall cocks is complete, install the pump exhaust to the outside of the building. Add oil to the reservoir on top of the pump, wire the motor and you are ready to milk.
Place the vacuum unit in a clean, dry, convenient area. Run a vacuum line from the 2.0" connection on the tank through the area where cows will be milked. The vacuum line should be 1.5" or larger and be looped. Install a stall cock on this vacuum line at each place a bucket milker will be operating. Many customers milk two cows at each stall cock. Automatic drain valves should be used at all low points or where risers are used on a vacuum line. Use pipe tees with a plug in one opening instead of using elbows in the furthest corners. This allows for better access for cleaning and checking air flow.
These units are complete with pump, motor, vacuum regulator and gauge mounted on a steel tank.
The Cond
dairy equipment, These units are complete with pump, motor, vacuum regulator and gauge mounted on a steel tank |
Central Vacuum Installation, Central Vacuum Sales, Central Vacuum Service, Hide A Hose Installation, Vacuflo Dealer, Chameleon Installer, Vacuum Accessories, Retractable Hose Systems, Commercial Wet Systems Installation, Vroom Retract Vac ...
Come From Enhancement Systems Central Vacuums
Vacuum Conveyor consist of Vacuum air generator, stainless steel suction tube, flexible hose, PE Bag filter (Ti filter ,SUS316 filter). compressed air cleaning device, pneumatic rotary cylinder discharge device, vacuum hopper and automatic level control device. This machine can ...
Come From Henan Efficient Technology Co., Ltd.
Then pneumatic discharge door will open, and the powder will fall into received equipment, The discharge door is closed automatically when finish feeding.then the whole conveying process start ...
Come From Henan Efficient Technology Co., Ltd.