DVP Automatic Centralised Vacuum System TRIPLEX

CPA triplex vacuum systems are primarily used as centralised hospital vacuum systems, or other large industrial vacuum applications.
   
These groups have been developed to meet the specifications required by EN 737/3 standards.
The standard version of triplex  vacuum systems comprises:

Three lubricated vacuum pumps complete with oil separator exhaust filter, mounted on a vertical framework to limit overall dimensions.

A vertical vacuum-tight welded steel receiver, complete with condensation drainage valve and by-pass to separate it from the system if required.

Three built-in non return valves on the pump intakes to keep the receiver under vacuum with the pumps stopped.

Three FCM type cartridge filters to protect the pumps from any impurities present in the system.

Three ball valves on the intake of each individual pump to isolate it from the system during maintenance.

Three vacuum switches each with two adjustable setpoints to start and stop the pumps.

Two electrical panels to start and run 1 2 or 3 pumps in manual or automatic mode, complete with cut-out switch, counter, on/off switch, automatic pump sequence device to balance wear, and a vacuum switch to trip a low vacuum alarm. Both electrical panels are housed inside a lockable metallic housing with IP55 protection;

A manually controlled ball valve mounted on the receiver to isolate the entire pumping group from the system;

A bactericidal filter unit with by-pass system may be mounted (upon request) between the isolating ball valve of the unit and the user system, as required by EN 737/3 standards.

All components are painted and mounted to make up a compact, reliable unit.

CPA triplex vacuum systems are primarily used as centralised hospital vacuum systems, or other large industrial vacuum applicati