pvc flange spigot

11. packing:  Wooden pallets or wooden cases

10.Internal lining: Cement Mortar Lined according to ISO 4179

9. Surface treatmentfitting Internal epoxy powder coating External pink resin paint.Black Bitumen Coated or Blue Fusion Bonded Epoxy Coated as specified.

8.flanged drilling standards:PN10&PN16&PN25&PN40,AWWA C110.

 Diameter:DN350-800  fittings 16 bar

 Diameter:DN50-300   fittings 25 bar

7.Hydrostatic Test Pressure

,flange joint(flange type)including flanged fittings,rubber gasket,flange-bolts&nuts.

  Socket end

Mechanical joint(Ktype)including spigot end,rubber gasket,anti-forrosive layer,T-bolts&nuts

.Push-on joint(Ttype) including Spigot end,EPDM&SBR rubber gasket,Anti-corrosive layer

6.Type of joint:

5.Product Microscopic Structure:ferrite+little pearlite grades of ductile lron>grade three(GB9941-88)

                  Proof Stress>300map

                  Hardness<250HB

                  Elongation>5%

4.Product Mechanical:Tensile strength>420mpa

3. Product export countries:Europe,South America,Africa,Middle East and South-East Asia,Their good quality has got a favorable appraisal from the end users.

2. Product standards:All types of ductile iron pipe fittings produced by us according to ISO2531 BSEN545 EN598 BS4772 standards

Anti-oxidation,anti-corrosion,etc.so the ductile iron pipe fittings are widely applied to such compressive pipes as water pipeline.oil pipeline,gas pipeline,sand pipeline,sewerage pipeline etc

1The use of the products and performanceNot only does ductile iron have high tensile strength and percentage elongation,but also have fine ductility and other excellent as anti-high-compression,

We manufacture and supply ductile iron pipe fabrications from 80mm-1200mm. We supply all sizes possible from short double spigots to longer double flanged pipes. All our pipework is available in BS EN545 blue and BS EN598 red.

Flanged Spigot:
1.Material:GGG500-7,or others
2.Standard:BS EN545/EN598/ISO2531/BS4772
3.Coating:FBE/Bitumen/Cement.