Worm Gearboxes

Also made as per customer's specifications, Drawing, requirements ;

Ratios from 5:1 to 4900:1 ;

In Single or Double Stage Reductions ;

Center Distances from 40 mm to 400 mm ;

Vast range of Models suit every individual's requirement ;

The Worm Gearboxes have Cast Iron Gear Case of streamlined design completely air tight, dust proof and capable of being installed in open without any cover. The Worm Shaft is made of Alloy Steel, duly hardened, tempered and ground. The Worm Wheel is made of Chill Cast Phosphorous Bronze and teeth accurately Generated on Gear Hobbing Machines. They are supported on Extra Heavy Duty Taper Roller anti friction Bearings of ample margin of safety to allow adequate journals as well as thrust loads. Lubrication is effected by splash of oil from the sump. Thus, no special care is required except for occasional oil topping to the required level. Air cooling is affected by means of standard polypropylene or metal fans. Apart from standard range, Gear Boxes are also tailor made to suit individual requirement or  as per specifications provided. They are available in:

Our range is available in different specifications and is thoroughly tested for quality at the time of procurements process;