Motor mould

4, production cost is low, the equipment investment is small. Due to the low cost of gasification (only for block price of 1/3), the material sources for forming equipment, less investment, small. Generally speaking this technology, equipment investment can reduce 30-50%, casting manufacturing cost can be reduced by 25% or 30%, casting yield 99%. Therefore, can fully believe epc casting technology with the general trend of development, has wide prospect.

3, casting shape, structure is not restricted to provide sufficient casting design. Originally from several parts processing, assembling component making then sliced through the method of integral casting glue shape. Originally, the hole hole needs can be cast out, it will directly greatly reduce the processing and assembling of man-hour and cost.

2, the whole process is easy to realize mechanization, automation production. Can greatly improve the foundry conditions, easy to realize pollution-free production. Low temperature polystyrene (EPS) for environmental completely harmless, pouring out of the organic matter is rarely (only the weight of iron, and adopted by 0.3%) from hard sand casting of organic emissions to 5% above, While EPS produce organic short time, easy to collect, can pass on vacuum flasks belongs to concentrate on the environment, green emissions. In addition, casting mould technology with disappear is greatly reduced and the cleaning work less noise, carbon monoxide and quartz sand dust, small harm recycling 97% above.

1, casting a shape, size precision. Owing to the foam plastics as easily gasification, modelling mould (models), no block parting surface, therefore, no sand core product without flash burr, no taper Angle, reduced because of cores of size error caused by combination, casting precision and surface roughness close revestment precision casting. At the same time, because of using dry sand modelling, the water in the sand, and because of the binder, affix castings defect, casting wastage decrease. In addition to this new process technology level of operators of foundry industry is not high, a huge attraction. Although foam model of deformation and foam of pyrolysis products may bring adverse impact on the quality of castings, but just to model and die making technology, coating materials and dry sand compaction, etc, the strict and effective control can completely overcome the disadvantage factors affecting the quality of castings, gain.

Motor mould
lost foam foundry
have import and export right
enjoy indpedent production
through ISO9001