Load Share Model (PER672N)

5)Weight:2.41kg

DC Supply..18-36 VDC(Transient and reverse voltage protected)
 DC Power Consumption.70 ma continuous

4)Power input
AC input signals.. 208 or 416 volt nominal line to line and 5 amp CTs with a minimum 6.25 VA rating.                    Internal 0.25 ohm burden resistors
Line to line voltagesper table below             
HZ      LOW RANGE       HIGH RANGE            
50      140-250 VAC         260-420 VAC            
60      170-260 VAC         340-500 VAC            
400     170-260 VAC         340-500 VAC

Signal.0 to 7.5 Volts DC representing 0-100% load
All performance specifications are based on 5 amps from the current transformer(CT) Secondaries at full load unity P.F.

3)Power Output

2)Performance
 Load SharingAdjustable to within +/-2% between sets
Performance.Isochronous and droop paralleling and power control
Reverse Power Monitor.Adjustable from 0.5-20% with a 2 second inverse time constant
Forward Power MonitorONtrip point adjustable from 20-100%                       
                                            OFFtrip point adjustable from 0-80%                   
                                               Normally open contacts with a 2 second inverse time constant

1)Description----The function of the Load Sharing Module is to proportionally share load between two or more generator sets while the system frequency is held constant.As an accessory to the electronic Governing System,the PER 672 measures the true power current ,and throught a parallel cable interconnection,continuously controls the governor system.

PER672N

PER672N can substitute for LSM672N