Smart Home Lamp Module (UK)

Compatible with any X10 controllers. For example: With X-10 Timer, you can ON lamps in your home on timing; With X-10 Mini-Controller, you can control all the lamps ON/OFF on bed or in chairs; and with Computer controller, you can control lamps in your home ON/OFF on web; also with Telephone Remote Controller, you can control all things above just though a phone line.
Installing easily with codes electronically set
Advanced Codes electronically set function in domestic. After pressing the Code set bottom for 5 seconds into setting situation, and use your controller (such as; Mini-controller) transmit address you want, then the plug-in module receives the address and memory it into EEPROM. You have done it in 5 seconds! All the processing is all automatic, very simple! Switch in break-off can memory this address for ten years.
It can respond All lamps On / All Units Off command.
When being out, you can turn off all lamps in your home only through one keystroke.
Low-signal driver (25mV)
X10 Carrier Signal can be absorbed by some lamps and switches and weaken signal, even sometimes lower than 100mV, while the signal down to 100mV can't be accept. So you needn't to worry about the absorption of X10 signal with the low-signal driver wall switch which can accept minimum 25mV.
Built-in noise filter can prevent the lamp noise.
With research, most of lamps dont conform to electromagnetic compatible. Those will send out power line noise leading interference to X10 system. Our product is design for Asia specially, and a built-in noise filter can prevent the lamp noise.

Compatible with any X10 Controllers

Lamp Module (UK) Model: PLC-P 2026UK

Fashion Casing Design is for UK market. A power line noise filter in it can prevent the lamp noise, Installing easily with electronically set codes, Compatible with any X10 controller.

Fashion Casing Design is for UK market. A power line noise filter in it can prevent the lamp noise, Installing easily with