semi-welded PHE
Product Details
The semi-welded PHE consists of plates welded in pairs using a special laser-welding process. Each second channel is secured by
- Place of Origin:China (Mainland)
- Country:China (Mainland)
- telephone:86-21-34628308
| Place of Origin: | China (Mainland) |
Send inquiry / quota request to semi-welded PHE
Relate products of semi-welded PHE
PH(J) Series Slurry Pump Application: PH(J) series of slurry pumps are cantilever centrifugal slurry pumps, which are suitable for transporting particles with small particle size (diameter less than 1mm), no sharp corners and high-concentration slurry. They can also transport ...
Come From Pansto Pump Co., Ltd
Density 1.3± 0.1g /cm3 Boiling point 226.1±20.0 °C at 760 mmHg Molecular formula C7H6FNO2 Molecular weight 155.126 Flash point 90.5±21.8 °C Accurate mass 155.038254 PSA 45.82000 ...
Come From hebei jiangkai
Product Feature The plate of the double wall plate heat exchanger replaces the single plate type with two welded plates. Once the plate is cracked or perforated, the fluid will flow between the two plates to the outside, which is easy to be found and taken. Doing this can avoid ...
Come From Qingdao Reapter Heat Exchange Equipment Manufacturing Co., Ltd.
Product Feature 1. Advanced high-efficiency split-flow guide area design, to ensure high heat transfer coefficient. 2. Plates arranged closely, occupying small space, with smooth surface, high turbulence, small fouling. 3. Plates and gaskets are of various types and can be ...
Come From Qingdao Reapter Heat Exchange Equipment Manufacturing Co., Ltd.
Product Feature 1. Rich in plate types, can meet any requirements of various media and working conditions. 2. Corrugated design patterns, to ensure high heat transfer coefficient, not easy to scale and block. 3. Plates processed by advanced technology, without residual ...
Come From Qingdao Reapter Heat Exchange Equipment Manufacturing Co., Ltd.
Product Feature 1. Unique split-flow design, removes dead zone, avoids corrosion and utilization rate of heat exchange area. 2. Rich in plate type and single-side inlet and outlet connection design,easy to install. 3. Gaskets neatly along the rubber groove with long service ...
Come From Qingdao Reapter Heat Exchange Equipment Manufacturing Co., Ltd.
Product principle The working principle of the plate evaporator is to compress the secondary steam generated by the equipment through the configured compressor, then raise the pressure and temperature to a certain range, and finally transfer it to the relevant heating chamber ...
Come From Qingdao Reapter Heat Exchange Equipment Manufacturing Co., Ltd.
Product introduction The plate condenser consists of plates that are welded together in pairs to form a so-called plate set. The concept of a plate set leads to two different types of channels: a weld channel for condensing steam and a gasket seal channel for cooling water. ...
Come From Qingdao Reapter Heat Exchange Equipment Manufacturing Co., Ltd.
Product introduction The semi welded plate heat exchanger is composed of a pair of plates, and each of the two plates is laser welded to form a pair of plates. It is sandwiched between the fixed pressing plate and the movable pressing plate in a superimposed manner. The mesh ...
Come From Qingdao Reapter Heat Exchange Equipment Manufacturing Co., Ltd.
Plates & Gaskets For Heat Exchanger 1.Raw material purchases from the same factory with famous brands like Alfa Laval, GEA, Funke etc. 2.Plates produced by precision molds and advanced press machine that detect & correct regularly. 3.Adpot same production and technology with ...
Come From Qingdao Reapter Heat Exchange Equipment Manufacturing Co., Ltd.
