Motorized Chain Pulley Block --MH3 Series Hoists
Product Details
| Designed for Continuous duty operation, also can be used in case of Power Failure & Introduced as a Low Cost Model in Electric Hoist Range | ||||||||||||||||
| Available in 3 Phase & 1 Phase | ||||||||||||||||
| Indigenously developed, No IS Standard available for the product in totality. Mechanical Parts manufactured as per IS: 3832 | ||||||||||||||||
| Driven on V-Belt (Ecodrive Fenner) | ||||||||||||||||
| Tested at 25 % Overload | ||||||||||||||||
| Hooks: As per IS: 15560 - 2005 | ||||||||||||||||
| Load Chain: 9 mm, Grade 80, Alloy Steel Material as per IS: 6216 | ||||||||||||||||
| Load Chain Wheel: S.G. Iron Casting Accurately pocketed | ||||||||||||||||
| Gears: Alloy Steel Material, precise machined, gear hobbed & case hardened duly annealed. Gears shall be lubricated with a semi-liquid grease instead of oil, which is less likely to leak, eliminates oil level checks and clings to the gears even after long idle periods. | ||||||||||||||||
| Motor: Foot Mounted Motor operating on 415 Volts, 3 Phase/ 1 Phase, 50 Hz AC Supply | ||||||||||||||||
| Braking Mechanism: Screw & Friction Disc Type Self actuating | ||||||||||||||||
| Control Panel Unit: Totally enclosed to protect from Weather, giving output at 24 Volts to the Operational Control Station (Push Button Station). | ||||||||||||||||
| Operational Control Station: Suspended from Hoist with a Cable & supporting Wire rope with two push buttons extendable to four / six push button station. Operated with 24 Volts. | ||||||||||||||||
| Guarantee: One Year from the date of sale on F.O.R. Kapadwanj basis, for free repair, replacements of any part proved defective in material or workmanship. | ||||||||||||||||
|
Available in 3 Phase & 1 Phase
- Material:Steel
