Self-suction Pump Exclusively for resistance to Acid/Alkali (Electroplating Equipment)

7. Pump flow should be based on tap water source.

6. The head shall be at/over 8 meters and the outlet shall be provided with a check valve.

    would cause idle running that would damage the pump.

    back upon occurrence of shutdown of the pump. The flowing back of liquid inside the pump

5. The inlet shall be provided with Ford valve or check valve to prevent the liquid from flowing

    damage by idle running (except the one installed externally).

    convenient manner, resistance to heating up to 179^oc and the pump is not vulnerable to

    to high heating, the shield is so designed as to be disassembled for replacement in a

4. Unique design of protective shield for shaft seal: Made of plastic steel with strong resistance

    concentrated alkali.

    CPVC that is effective to resist the majority of acid/alkali liquids, and PVDF can resist the

3. Resistance to corrosion: The pump is made of special plastic steel including FRPP and

    suctioning. 

    20 feet. Type 3 pump is equipped with tongue-shape single-phase power device for the self-

2. The self-suction design: It has a very strong suctioning capability that can reach a height at

    chemical natures.

1. Service temp: FRPP below 75^oC. CPVC below 75^oC. PVDF below 90^oC; depending upon

The coaxial, self-suction Pump exclusively for resisting acids/alkali generally.

Self-suction Pump

Self-suction Pump Exclusively for resistance to Acid/Alkali