Air Impact Wrench

Modell:AT-3007Drive Size:1/4SqMaximum Torque:30lbs.ft.Air Consumption:5cfmOperating Pressure:90psiAir Inlet Size:1/4BSPWeight:0.5kgFree speed:230rmpMini air wrench is suitable for applications where space is at a premium. Superb forengine bay work on cars, commercial vehicles, motorcycles and outboards. Compactdesign utilises high quality bearings and rotor end plates for smooth power output.Rear exhaust with baffle reduces noise and oil spray.Model:AT-3006Ultimate torque: 50lbs.ft. (6.92kg/m)Free speed: 150rpmOperating air pressure: 90psi (6.2 Bar)Average air consumption: 4.0cfm (114L/min)Minimum hose size: 3/8 I.DAir inlet: 1/4 BSPWeight: 1.1kgRatchet ideal for most applications in the automotive workshop and is suitable forradiator, fuel pump and spark plug removal. Model:AT-3005Drive Size:1/2Sq DrMaximum Torque:50lbs.ft.Air Consumption:4cfmOperating Pressure:90psiAir Inlet Size:1/4BSPWeight:1.2kgAir powered ratchet with hardened steel anvil and twist-to-reverse mechanism. Triggeroperated power control. Suitable for use in the engine bay where there is limitedspace for hand operated ratchets.Model:AT-3002Drive Size:1/2Sq DrWorking/Maximum Torque:230/270lbs.ft.Free Speed:700rmpAir Consumption:4cfmOperating Pressure:90psiAir Inlet Size:1/4BSPWeight:2.2kgFitted with rocking-dog type clutch and hardened impact anvil. Suitable for generalgarage use. Features four-position adjustable air/torque control and reversibleaction.Model: AT-3001SpecificationsDrive Size:1/2SqWorking/Maximum Torque:285lbs.ft.Air Consumption:8cfmOperating Pressure:90psiAir Inlet Size:1/4BSPFree Speed: 7000rpmPowerful 1/2 impact wrench with twin hammer mechanism and pressure feed lubrication system. Air motor features quality bearings, ductile steel end plates and carefully finished components to ensure smooth running and maximum power. Combination forward/reverse and speed selector. Suitable for heavy tyre shop useModel :AT-3003Wring thread scope:  20-30mmWring forque: above 1500N.mWring time: less than 3sLoad air consumption: less than38L/sNoise:  less than110 dB(A)Gas pipe inner diam: 12-16mmWorking gas pressure: 0.63MpaEdge distance: 50mmMachine weight: 10kgDriving tetra gnal size:25x25mm