Pneumatic Drum Pump SP1.2T-1

2.During operation,in case there is leakage due to the adjusting nut is wear by airproof,please adjust the nut timely.

1.During working, if the cylinder body has fever (if feel fever by hand), please immediately add 30# lubricating oil. 

V.Attention:

3.Before using the pump that has been not used for a long time, should clean it in solvent under the condition of working, to avoid the feeding pipe is obstructed due to frozen pulp.

2.After the piston run 100 million times, according to the condition of water content accumulated during the air compressor sends gas, should clean the cylinder body, and apply and inject 30# lubricating oil. 

1.During operating the pneumatic pulp pump, should prevent the cylinder body from impact and deformation, and avoid seizing-up of the piston.

IV.Maintenance:

3.The intake valve is in the state of "OFF", and then connect the gas source pipe with the intake joint. According to required pulp flow, start the intake valve to adjust the running frequency of the pulp pump.

2.connect the corrosion-resisting hose between the discharge port and the feed port.

1.correctly place the feeding pipe in the charging basket to be delivered.

III. Operating instructions:

This product utilizes pressure different to make the piston run up and down, which can drive the feeding piston to start and stop, thus realizing the purpose of pumping pulp. Its working gas flow and feed flow are adjustable. In addition,it can automatically work through pneumatic hydraulic pressure control system. 

II. Structure and principle:

chemicals, spray painting, spray dyeing, Film aluminum plating, glass steel, pvc-steel, petroleum, mining, shipping, automobile, communication, electrical equipment refrigeration etc, and can be also suitable to transport high-viscosity liquid pulp with 12 ten thousand CPS/25, having the functions such as corrosion resistance, anti-sediment, low noise, energy saving etc. It is an ideal feeding facility.

Our pneumatic drum pumps are widely used in the fields such as leather, textile, printing and dyeing, wallpaper, coating, color painting board, color steel tile, cosmetic, food, medicine,

I. Usage:

Pneumatic drum pump (short for drum pump, also known as barrel pump, leather pulp spray pump, high-viscosity pulp pump, pneumatic pumping, pneumatic paint pump, pneumatic plug pump,pneumatic prevent explosion inserting the barrel pump, pneumatic intercourse pump)

Gas Consuming:0.3-1.0m³/min

Cylinder Pressure: Ratio2:1

Liquid/Pulp Outlet Pressure:3-10mpa

Gas Supply Pressure:0.3-1.0mpa/min

Gas Supply Interface:3/8''

Liquid/Pulp Outlet Interface1^1/4''

Maximal Viscosity:50000CPS/25 Centigrade

Maximal Air Demand:10 kg/cm²

Maximal Passing Grain:1.2mm

Raising Distance:30m

Flow: 10-30L/min

External Diameter Input/Output:60mm/32mm

Specifications:(Diameter)100mmX (H)1450mm

We customize the various types of passing in and out joints and many kinds of dimension of the pipe connecting pump