KelRon pump
Product Details
- No adjustments are necessary due to the natural torque of the pump head on the pump tubes. The tension is self-adjusting and there is therefore no danger of over-tensioning.
- The inbuilt microprocessor controls the following functions: change of flow direction; speed control; recording of running time; control of running intervals; pre-programming of variable speed settings.
- The electronics are housed in the pump head. This separation of wet and dry units prevents possible leakage from the tubes to the electrical components.
- The KelRon?pump runs off a 12VDC supply which, when connected to a battery, is ideal for field use. It can also be connected to a 220 VAC electricity supply by means of an adaptor.
- The KelRon?pump can be connected to an external computer using the specially developed KelRon? software. This software boasts of the following features: calculating the life left of each respective tube, speed adjustments; displaying the accumulated flow rate, recording the volume delivered by each respective tube over a defined period.
- An industrial model which does not have user-friendly electronics is also available. This model does however have various speed settings.
- The KelRon?NT ?12 for small volumes can be modified to a KelRon?NT ?4 for large volume dosing by exchanging the fingers and pump tube holder. The flow rate can be increased further by
changing the gear ratio.
- The flow rate ranges from 0,5ml/min to 7,7 ml/min per tube for the NT- 12. The NT-4 has a maximum flow rate of 110ml/min per tube. Should the gear ratio be changed, this can be increased to 220ml/min per tube.
- The removable pump tube holders have been specially designed to offer the following advantages:
- The pump tubes can b pre-installed in the system with ease.
- The life of the respective pump tubes is extended considerabily due to the varying points of cantact of the rollers on the tubes.
- The KelRon?can be connected to an autosampler.
- The dimentions of the KelRon?pump are as follows:
Height: 260mm
Length: 310mm (NT-12)/ 360mm (NT-4)
Width: 153mm and 7mm for electric cord = 160mm
Mass: 12kg
- Country:South Africa
- telephone:27-27-12-349-1678
|
Height: 260mm Length: 310mm (NT-12)/ 360mm (NT-4) |
