horizontal pumps

      

 

Control system is equipped with the controller, allowing to bring parameters of work of the HPS in memory and to transfer the data through RS-485 interface.

It is necessary to note, that the frequency converter self-setups on loading in such a manner that the optimum balance of consumption of active and jet power is provided.

Automatics will control the set pressure on an output of the system.

- Change of the pump ratio.

- Changes intake capacity of well;

- Changes of amount and pressure of water on the input of the pump;

And, with change of injection  conditions :

With its help it is possible to maintain work of pump   systems  in a zone of the maximal efficiency (so minimal energy consumption), owing to that that the system itself selects necessary frequency of rotation of the engine of pump system for maintenance of the set pressure on an output of the pump.

6 .        Control system on the basis of the controller includes the frequency converter and system of PID-regulation (PID means automatic maintenance of the set pressure on output the pump due to correction of frequency).

Besides this application of the frequency converter provides essential reduction in expenses for the electric power, especially at operation together with system of PID-regulation.

5.         The frequency converter provides safe smooth start-up and  stop of the pump unit, protects the engine from high current loadings, allows to abandon an opportunity of sharp shock mechanical loadings on a shaft and the thrust chamber of the pump occur, smooths lacks of network power supplies of technological installations.

 

4.         The assembly frame is intended for installation HPS parts on it.

3.         The corrosion resistant horizontal centrifugal pump is intended for pumping injected liquid. Recommended pressure upon input of the pump from 0,5 up to 4,0 . Frequency of rotation of a shaft of the pump 3000-4106 RPM. Efficiency of the pump is 72 %.

2.         The thrust chamber is intended for removal of axial loadings and anti-pressure removal from pump section.

Rotation frequency of a shaft of the electric motor is 3 000 RPM (rotates per minute).

A temperature mode of operation is up to 90 C.

0,38, 0,69, 6 kV.

1.         The three-phase asynchronous electric motor provides a drive of the pump. Rated voltage is:

High efficiency and optimization of parameters of expenses for 1m? of Flow.

Advantages of the HPS:

 

 

 

From 1800 Up to 4200

 4520-9000

75-500

0,5-4,0

6,0-30,0

100-2500

25- 70

Weight, Kg

Length of the Horizontal pumping system, mm

Power of the electric motor, KW

Pressure On input of the pump, MP

Pressure On the output of the pump, MPa

m ?/day

Flow,

Frequency Range, Hz

Technical Data:

 

Purpose: Horizontal pump system is intended for injection water into oil wells with the purpose of maintenance of strata pressure of oil deposits.

 Horizontal pumping system  (HPS)

our direct partners in realization of projects are the leading machinery and  electrical companies of russia , kazachstan,lithuania,PRC,USA,Germany ..

the company is putting  into practice projects on selective limitation of water inflow in wells with help of pumping-down into strata special emulsions (forming in well bottom zone gydrofobyous barrier gel).

*kuper* company for the period of 2005-2007 had equipped by ESP(electric submersible pumps) and screw pumps the following number of oil wells in Lithuania 12 units., in Kazachstan-42 units, in Indonezia-4, we have supplied component parts to germany for thirst in countries of Europe Union screw pump unit with lower drive. based of the individual projects has been produced and installed to customers MNKNS(mobile block cluser pumping station) for system of maintenance of stara pressure on the base of goryzontal pumping units for the following  companies : JSC *RITEK*-1 unit and 5 units are production process, TOO*kazpolmunai*-3 units, TOO*Tolkinneftegas*-3 units, TOO*Kazneftehim-kopa*-1unit (with 2 facilities in maintenance of srata pressure in JSC*slavneft-megionneftegas*-4 units).JSK*NK Magma*2 units, JSC*RN-Severnaya Neft*((Rosneft division))-4 units .

informations: project by *kuper* company .

our company together with well-defined innovation policy uses services of well-experienced specialists who are working in this field in JSC*tatneft* for many years , so the best result is being achieved.we are not bordered with strict limits when choosing the variant of solving questions pointed by our customers . thats why every project appears to be individual , and the materials and technology are being chosen on the base of customers vision and for definite aims ..

we were trusted to provide  advancement of technology of building  and repair of oil wells by using profile liners to the markets of community of  independent states and baltic region ...

(tumen city ) , .

our company *kuper* ( location: almetyevsk, tatarstan, russian federation ) is working on the field of small and medium  projects in area of lifting, maintenance of strata pressure in oil production . we work in close cooperation with joint stock  company *tatneft* and our real location is on the base of production service electric commerce and industry of JSC *tatneft*, and of JSC *neftemash*

 

Horizontal pumping system (HPS)