AYZ oil pump

Note: the pressure of cooling water should be 0.15-0.29Mpa. In order to avoid the medium leaking, the pressure of the seal oil should be 0.05-0.15Mpa higher than the pressure of the side seal chamber.

Please use normal temperature seal oil in the seal chamber

Seal chamber, bearing, support

Parallel Connection (parallel connection if gland seal)

over 260

Please use normal temperature seal oil in the seal chamber

Seal chamber, bearing, support

Connection in series(parallel connection if gland seal)

200-260

Please use normal temperature seal oil in the seal chamber

Seal chamber, bearing

Connection in series(parallel connection if gland seal)

80-200

If the transporting medium is the clean oil, it is Ok to directly lead the medium in the chamber to the seal chamber as cooling liquid.

Seal chamber

Connection in series(parallel connection if gland seal)

0-80

Note

Cooling part

The connecting way of the cooling pipe

The temperature of the transporting medium

 It is necessary to cool down the seal chamber, bearing and support of the pump to make the pump work normally, free from the influence of the temperature of the medium.

5.     seal and cooling system

4.     seal: there are sealed ring installed on casing, cover and impeller separately. The shaft is sealed with standard mechanical seal. Without any special request by the user, we usually seal the shaft with 103 unbalanced single seal or 109 balanced single seal( meets the standard JB1472-75).  Please consider oil as the matching material. If the transporting medium contains particles, then we have auto- washing structure for choice.

3.     The bearing is combined by a couple of cross corner bearing and one centripetal rolling cylinder bearing, which are installed in the bearing to support the rotor and endure part of the axial force. The bearing is usually lubricated by thin oil. And there is a cooling chamber in the bearing, which can be used to cool down the bearing if necessary.

2.     The rotor is combined by impeller; nut of impeller, shaft, and shaft sleeve. The axial force is balanced by the pressure relief of balanced holes on impeller.

1.     The housing of the pump is combined by casing and cover, which endures all the working pressure and heat load by the temperature of the medium.

AYZ centrifugal oil pump has two kinds of structure: single stage cantilever and double stage cantilever.

Structure Illumination

1.     AYZ oil centrifugal oil pump is newly designed on the base of AY centrifugal oil pump. It changes the inlet into be aclinic while keeps the good performance and installation dimension of AY. It is kind of environmental-protect product. The AYZ centrifugal oil pumps are used for the transportation of oil products, free of particles, or other mediums which are with similar chemical and physical properties to oil. They are widely used in the petro-chemical industries, oil refineries, oil terminals, chemical plants, oil fields and so on. AYZ complies with national stands GB3215-82, the centrifugal pumps technology for the refineries, chemical and petro chemical. The pump is with the flow rate range: 9-500mmm/h and head range: 38-300m.

AYZ centrifugal oil pump is newly designed on the base of AY oil centrifugal pump.

try oil pump    oil pumping    to get through more products