The main parts of cylinder assembly are cylinder body (longer) and caps which are manufactured from cast iron. All other components are manufactured from gun metals. The three pump buckets are made from nitrile leather. The plunger rods are 500 mm long of SS 12mm diameter. The brass liners are manufactured from temper annealed materials Cu Zn 30. Cylinders are painted with the redoxide primer and two coats of finish with metal enamel paint.
:
iii Cylinder Assembly
The main parts of the handle assembly are similar to that of India Mark II Handpump except that the handle bar is made out of solid 40 mm M.S. square bar, with T-bar arrangements. Additional plates are provided depending upon the depth at which the cylinder is placed.
:
ii. Handle Assembly
There is no change in the pump head assembly as compared to the India Mark II Handpump except that the bracket opening is made to suite 40 mm square handle bar.
:
i. Pump Head Assembly
They are suitable for static water levels varying between 50 and 90 metres where placement of cylinders can be upto 85 metres. The inner diameter of the borewell, where these pumps are installed, should not be less than 100 mm.
India Mark II Pump with minor modifications is capable of drawing water from operating depths upto 90 meters. These pumps are
exclusively used for extracting water from greater depths
Extra Deepwell Handpump
Application: | Metering |
Place of Origin: | Maharashtra India |