Sealing Packing

PG-880 expanded graphite knitted tape:Knitted from expanded pure graphite yarn, this tape has high strength and good flexibility,
and offers fire safety and temperature resistance. It can be used aspacking in expansion joints, on valve stems and agitators, and as a sealing gasket
in furnace doors.CP-745 graphite fiber packing with pure graphite core:Manufactured from high quality carbon yarn, Inconel wire is inserted for increased
temperature and pressure resistance. The surface is coated with a special compound
and molybdenum trioxide to help prevent wicking and volume loss.CP-720 carbonized fiber packing:Braided packing made of carbonized poly acrylonitrile fiber finished with PTFE dispersion
and lubricant, this material is an efficient sealing for high-speed shafts.It is relatively economical among non-asbestos packing, and can be used withwater, brine, factory waste, salt solution, weak acids, mineral oil, etc, in centrifugal
pumps, mixers, agitators, stern tubes, etc.FP-550 PTFE packing:Braided packing made from PTFE yarn without dispersion or lubricant impregnation,
this material is recommended for IC related lines, fine chemicals, food and pharmaceuticals
where contamination is not allowed. It can be used to seal all chemicalsexcept molten alkali metals.FP-540 PTFE fiber packing (soft):Pure PTFE fiber packing, this material has a greatly enhanced ability to seal high-speed
shafts. It has resistance to chemical and mechanical attack, great dimensionalstability, effective sealing with low gland pressure, etc. This packing isnot recommended for use with high speed pumps.FP-540G graphite-PTFE packing:Braided packing of PTFE yarn with graphite particles, this material is recommended
for shafts for almost all chemicals. Stability and long service life are achieved
due to the low friction coefficient, great tear strength and high thermal conductivity.
This self-lubricating packing does not score, and minimizes sleeve replacementcost.It can be used with alkalis, solvents, water, steam, and acids (except strong oxidizing)
for centrifugal pumps, autoclaves, agitators, mixers, etc.KP-340F Kevlar fiber packing (NA):Manufactured using Dupont's Kevlar yarn impregnated with PTFE dispersion and treated
with lubricant, then braided into square cross-sections, this packing is usedin higher-pressure applications that are normally not tolerated by other typesof braided packing. Due to its steel-like strength, it can be employed separately
or as back-up with other types of packing.Developed to replace asbestos packing for pump systems, it covers all the service
ranges which asbestos packing provides. It also affords longer life under severe
conditions that conventional asbestos cannot provide, such as sand slurry tinmining, paper slurry etc.KP-350G Graphite-PTFE fiber with Kevlar yarn packing (NA):Combining PTFE with graphite and aramid yarn, this packing prevents gap extrusions
within the high pressure and temperature range. With good sliding velocity andthermal conductivity, it is recommended for use with piston pumps up to 500bar.It can be used with water, sewage, hot water, oil, grease, gases, weak acids, alkaline
solutions and abrasive media.ASP-001 asbestos packing:This is a spiral form of Chrysotile white asbestos packing. Impregnated with high-temperature
resistant lubricant (oil/graphite lubricant and corrosion inhibitor)and vulcanized, it has a highly resistant structure. A valve and pump packingof proven performance in the high pressure and temperature range, it is suitable
for use with water, steam, oil, solvent vapors and abrasive media.

Various types of packing; including graphite packing, Kevlar packing, PTFE packing, asbestos packing, sealing packing and so on.