insulating glass sealing strip

To place the finished insulating glass vertically and limit the pieces of glass in one bundle within 20 pieces

To conduct sealing of the last mouth carefully in three steps of hot pressing, air releasing and sealing

To give daily check to the temperature and size of glass coming out from the hot press

To keep the two pieces of glass in conformity when they are stuck together

To stretch the strip straight, and leave 2mm3mm off the glass edge

To make sure the glass is clean and dry for operation

To avoid contacts with anything that will affect the adhesiveness of the strip to glass

Thickness of insulating glassThickness of two layers of glassThickness of strip

To select the right model according to the thickness of insulating glass as follows:

To store it according to the requirements when not used

Matters Needing Attention
To use the product in one year from the date of manufacturing

Both auxiliary equipment and considerate service will be provided for you to manufacture insulating glass with the HUALI ADHESIVE STRIP. If production is conducted with equipment supplied by other factories, make sure the temperature and size of glass coming out of the machine be correctly controlled. Please contact us if any technical uestion arises.

Seal the last mouth after the glass comes out of the hot press. Make sure the two ends of the strip have enough contact and no air bubble or air channel be left

Send the dual-layer glass into the hot press from which the most ideal temperature of the strip is expected to be 50

A new warm edge insulated spacer for insulating glass. It is made by butyl rubber sealant, aluminum spacer and dessicant.