5.Available in various sizes and colors
3.Any spectification is welcome according to your requirements
3.Oil-resistant, high/low temperature-resistant,aging resistant
2.Can be used for automotive, oil and gas machines,water pump etc
1.All manufacturing processes confirm the ISO 9000 system
Rubber sealing rings
Rubber sealing rings
1.NBR,EPDM,NR,H-NBR,VITON
2.Available in various sizes and colors
Brand Name: | jwnm |
Place of Origin: | China (Mainland) |
Style: | O Ring |
Rubber seal is one of the common base components in sealing device, and plays an important role in the leaking and sealing. It is composed of one or a few parts of the annular cover, fixed to the bearing ring or washer and contact with another ring or washer or form a labyrinth ...
Y-shaped sealing rings are widely used in reciprocating sealing devices, and their service life is longer than that of O-shaped sealing rings. The applicable working pressure of the Y-shaped sealing ring is not greater than 40MPa, and the working temperature is -30~80℃; ...
Come From Pansto Pump Co., Ltd
What is a Y-type sealing ring and what is its function? Today Shijiazhuang slurry pump manufacturer will introduce it to you. The Y-shaped sealing ring has a Y-shaped cross-section and is a typical lip sealing ring. Because its service life and sealing performance are higher ...
Come From Pansto Pump Co., Ltd
The O-type sealing ring is a rubber sealing ring with a circular cross-section. Because its cross-section is O-shaped, it is called an O-type rubber sealing ring, also called an O-ring. It began to appear in the mid-19th century, when it was used as a sealing element for steam ...
Come From Pansto Pump Co., Ltd
The O-ring is an extrusion seal. The basic working principle of the extrusion seal is to rely on the elastic deformation of the seal to cause contact pressure on the sealing contact surface. If the contact pressure is greater than the internal pressure of the sealed medium, ...
Come From Pansto Pump Co., Ltd
The O-rings of horizontal slurry pumps can be divided into static seals, reciprocating seals, rotating seals and switch seals according to the relative movement state between the seal and the sealed device. According to the compression amount (tightness) of the O-ring ...
Come From Pansto Pump Co., Ltd
Although the O-ring for sealing the slurry pump is a very small accessory in the entire assembly of the slurry pump, its role is irreplaceable. Today we will talk about its characteristics. As for the O-ring used for reciprocating motion, its motion friction resistance is ...
Come From Pansto Pump Co., Ltd
Capacity: 666-1440m3/h Head:14-60m Speed:600-1100rpm npshr:4-10m Eff:73% handing solids:65mm send:sales14@tobeepump/com web:tobeepump.store itemmodel:10/8E-M Medium Duty Slurry Pump Material:High Chrome ...
Come From Tobee pump Co.
Sealing hull and deck seams: Marine rubber seal is used to seal the seams between the hull and deck of a boat, preventing water from entering and causing leaks and corrosion. Sealing transom joints: Marine rubber seal is used to seal the joint between the transom and the hull, ...
Come From Wuhu Ping'An Rubber Co., Ltd.
Seal Spare Parts Sealing Rings Brief Introduction of Sealing Rings The seal ring is a ring seal with the notch, it is placed in the ring groove of the sleeve, the sleeve rotates together with the shaft, and the sealing ring is elastically attached to the inner hole wall of the ...