Fitting for making striking and turnable rock-digging machine to dig medium-rigidity or hard rock.
86
2460
14.3-14.6
YK20
Fitting manufacturing of striking and compressing mould tool, e.g. striking or compressing of watch accessory and spring flake of music instrument,etc; clash-manufaturing of battery cell and mould of toothpaste hull; striking and compressing mould of small-size steel ball; bolt and screw cap; compressing plank of heat-rooled twist drill head.
85
2600
13.4-13.7
YG20
Fiiting manufaturing of striking and turnable rock-digging machine to cut hard and extremely hard rock floor; plucking of steel stick and steel pipe with high compress ratio; mould core of striking and compressing tool; hard alloy automatic compressive machine,etc.
87
2200
13.9-14.2
K40
YG15
Fitting serving as fine-head in striking turnable rock-digging machine to dig medium-rigidity or hard rock; tooth of coal-cutting machine to sever hard nipstone; processing of oil-well drill head and hard stone material; pluncking of steel stick and stel pipe with high compress ratio; manufacturing of machining knife, planing knife, and electric drill head,etc
88.0
1815
14.5-14.8
K30
YG8c
High strength in use, impact and shock resistance higher than YG6, but wear reisistance and cutting speed comparatively lower. Suitable for roughing of cast irons, non-ferrous metals&alloys as well as non metallic materials at low cutting speed.
89.5
1780
14.6-14.9
K30
YG8
Higher wear resistance, yet lower than YG3,impact and shock resistance higher than YG3x. Semi-finishing and finishing of cast irons, non-ferrous metals&alloys and non matal materials at medium cutting speed.
90.3
1700
14.8-15.0
K15-20
YG6
Fine grain wc alloy, wear resistance higher than YG6, strength close to YG6.Suitable for machining of chilled alloy cast irons and refractory alloy steel or finishing of ordinary cast irons.
91.7
1700
14.8-15.1
K10
YG6x
Best wear resistance among W-co alloys yet impact toughness comparatively low. Suitable for high speed finishing of small chipi section of cast irons, non-ferrous metals&alloys, quenched steel and alloy steel.
92.8
1280
15.1-15.3
K01
YG3x
High strength in use and good impact & shock resistance. Suitable for rough turing and rough milling of carbon steel and alloy steel during continuous cutting or medium to fine turing during imtermittent cutting.
91.0
1450
11.3-11.5
P20
YT14
Suitable for semifinishing of the medium chip sections of steel, cast steeland alloy steel or finishing of small chip sections.
91.8
1350
11.2-11.4
P10
YT15
Application
Hardness
(N/mm3)
Power of bending resistant
(G/cm3)
Density
Equivalent to ISO
Grade
our carbide sealings are of various specifictions and grades, high quality and workable price.
Delivery Time: | 15-20 days |
Package: | packed in carton. |
Supply Ability: | 8 Ton per Month |
Minimum Order Quantity: | 10 Kilogram |
Payment Terms: | L/C,T/T |
Port: | Shenzhen |
Fob Price: | US$45-80Shenzhen |
Brand Name: | TLY |
Place of Origin: | Hunan China (Mainland) |
Y-shaped sealing rings are widely used in reciprocating sealing devices, and their service life is longer than that of O-shaped sealing rings. The applicable working pressure of the Y-shaped sealing ring is not greater than 40MPa, and the working temperature is -30~80℃; ...
Come From Pansto Pump Co., Ltd
What is a Y-type sealing ring and what is its function? Today Shijiazhuang slurry pump manufacturer will introduce it to you. The Y-shaped sealing ring has a Y-shaped cross-section and is a typical lip sealing ring. Because its service life and sealing performance are higher ...
Come From Pansto Pump Co., Ltd
The O-type sealing ring is a rubber sealing ring with a circular cross-section. Because its cross-section is O-shaped, it is called an O-type rubber sealing ring, also called an O-ring. It began to appear in the mid-19th century, when it was used as a sealing element for steam ...
Come From Pansto Pump Co., Ltd