Conductive Silicone & Fluorosilicone Elastomers - O Rings

Extruded and jointed "O" rings are our preferred method of production, but moulded versions are available if specifically requested.
Both silicone & fluorosilicone with all varieties of fillers are available for the manufacture of "O" rings.

The advantages of vulcanised "O" rings are:

Cost Effective
No tooling costs
Reduced lead times
Better surface finish (zero flash)
Allows hollow sections to be used for lower compression force
Custom lengths easily produced (up to approx 2m developed length)

Standard "O" Rings

In addition to custom sizes, we can also supply a standard range of Rear Mounting Jam Nut "O" rings suitable for use with MIL C 26482, 38999 & 81511 connectors:

Shell Size	MIL C 26482/38999	MIL C 81511	Inside Dia	Section Dia
	Kemtron Part Number	Kemtron Part Number
6	1301-6-XXX	-	14.00mm	1.78mm
8	1301-8-XXX	-	17.16mm	1.78mm
8	-	1302-8-XXX	18.77mm	1.78mm
9	1301-9-XXX	-	20.35mm	1.78mm
10	-	1302-10-XXX	21.95mm	1.78mm
11 & 12	1301-12-XXX	-	25.12mm	1.78mm
13 & 14	1301-14-XXX	1302-14-XXX	28.30mm	1.78mm
15 & 16	1301-16-XXX	1302-16-XXX	31.47mm	1.78mm
17 & 18	1301-18-XXX	1302-18-XXX	34.65mm	1.78mm
19 & 20	1301-20-XXX	-	37.77mm	2.62mm
21 & 22	1301-22-XXX	-	40.95mm	2.62mm
23 & 24	1301-24-XXX	-	44.12mm	2.62mm
XXX = Material type - see . Example: 1302-8-FNG is a MIL C 81511 Shell size 8 "O" ring in Fluorosilicone with Nickel Graphite filler

Country:Brazil
telephone:55-44 01376 348115

are our preferred method of production, but moulded versions are available

*Your name:	Enter name here eg:Ralph zhang
*Your Email:	Enter email here
*To:	KEMTRON LTD
*Subject:
*Message:
	Enter between 20 to 3,000 characters. English only. Characters Remaining: 0 / 3000
*Enter the secure code shown below	Reload Image