EAZY SEAL

EAZY SEAL (General Purpose Epoxy Putty) Structure & Salient Properties Eazy Seal is an epoxy resin based sealant supplied in putty consistency, extruded in a pre measured stick form ensuring right mixing ratio. Properties of Eazy Seal Resin Hardener Type of Compound Filled epoxy resin compound Filled hardener compound Color & Appearance Green Stiff Putty Black Stiff Putty Penetrometer reading 24h / 250C mm 6.0 6.5 6.0 6.5 Setting time of Resin + Hardener at 250C minutes 90 120 90 120 Ash Content % 75 80 75 80 Shelf life months 12 12 Eazy Seal sealing system is characterized by Excellent adhesion to almost all materials like metals, wood, glass, ceramic and most plastic. Ease of application. Good mechanical and electrical insulation properties. Good moisture and chemical resistance. Mixing Proportion Eazy Seal Resin : 100 parts by weight or volume Eazy Seal Hardener : 100 parts by weight or volumeCut required quantity along with the film for the cocentric stick Twist and knead ( action not exceeding over 1 minute) to a uniform color. Repairs should be done before hardening ( usually within 3 minutes ). Place the remaining quantity in the canister and close the cap for future use. Processing Time Pot life at 250C : 30 minutes ( for 500 gm mixture )Setting time : 120 minutes Recommended Curing For optimum cured propertiesat 250C - 24 hoursor at 300C - 12-16 hoursor at 400C - 4-8 hoursEazy Seal will cure to hard mass within 3 hours at room temperature. Surface Preparation For better adhesion, it is essential to clean the surface on which Easy Seal is to be applied. Remove rust, dirt or loose particles by emery paper or wire brush. Use rust remover for removing heavy rust and scales.All surface must be free from oil and grease. Use rust remover, and / or trichloroethylene. Surface should be free from moisture to get optimum performance. Wipe with dry cloth before application. Properties of cured Eazy Seal Cured for 24 hours at room temperature.Tensile Strength kg /cm2 190 Flexural Strength kg/cm2 320 Impact Strength KJ/m2KJ/m2 4.03.5 Compressive Strength kg /cm2 60 Heat distortion temperature 0C 40-45 Volume resistivity at 1000v DC At R.T After 24 h immersion in water ohm.cm ohm.cm 6.0x1012 5.0x109 Dielectric Strength at room temperature (EAZY SEAL IS EQUIVALENT TO EPOXY SEALING COPMOUND M-SEAL,BECK -SEAL , ARA SEAL