Online Leak Sealing / Under Pressure Leak Sealing Technology

5. When the system temperature is lower than 250 ? , the TXY-18#, TXY-16# or TXY-8# sealant could be adopted to seal the leakage. After the injection is completed, the sealant should be replenished for pressing in the correct order so as to avoid the laxation of stress.

4. As for the leakage sealing with high pressure and low temperature, the outer heating method could accelerate the solidification.

3. As for the grain or strong sticky medium sealing leakage, the edges should be set for the clamp to prevent the sealing airproof cavity.

2. The serious leakage parts with high temperature and high pressure should adopt the TXY-18# for sealing, and attention should be paid to the coordination of the drive speed and the solidifying duration.

1. When the valve packing box or high-temperature system flange connection gap is small, for sealing of leakage, the TXY-16# sealant should be adopted.

Applied Reference

The sealant could, under certain pressure and temperature, become deformed and fill airproof cavity.

(5) Fluidity of technology

11

18

44

62

90

TXY - 20 #

11

15

25

57

110

TXY - 18 #

15

24

45

63

150

TXY - 16 #

( min ) Basic solidifying duration (min)

350

300

250

200

150

Ambient temperature ( ? )

Model of sealant