Teflon Back-Up Rings

Single Turn - MIL Standard MS28774
Solid, Extended Series
Single Turn, Extended Series
Single Turn, Heavy Duty
Solid, Heavy Duty
Solid - MIL Standard MS27595
Spiral - MIL Standard MS28782
Spiral - MIL Standard MS28783
Single Turn, Boss Connection - MIL Standard MS9058
Single Turn, Tube Fitting - MIL Standard MS28773
Spiral, Extended Series

Care should be taken to be sure that the compound chosen is compatible with the gland or rod materials of construction. There is no point in over designing components that may cure extrusions, but produce abrasion or wear problems.

Filled Back-Up Rings
For applications where sealing systems are subjected to severe duty cycles, or where pressures exceed 3,000 psi and temperatures are above 275 degrees F, filled Teflon back-up rings are very useful.
In addition to the more common fills such as glass fibers, considerable experience with back-up rings of Nylon, Kel-F, FEP, UHMW and others. We have produced the very standards using these materials as well as more specialized compounds of Teflon.

These configurations have proven very useful to fluid systems designers because of the added flexibility in size selection.
Because extended sizes usually are available, industrial users are assured of the same quality and service that applies to the most sophisticated aerospace applications.

Extended Sizes
In addition to the military standards, we supply three series of extended dash-size standards which provide back-up rings for all o-rings in the Aerospace Standard AS-568A Uniform Numbering System.

Heavy Duty Back-Up Rings
Heavy duty back-up rings are configured with a greater T (axial thickness) dimension. The extra thickness provides more extrusion protection for o-rings. These rings are interchangeable with MS27595, MS28774, MS28782 and MS28783 backup rings used in MIL-G-5514 packing glands. Heavy duty back-up rings are available in solid (uncut) and in the single turn (scarf cut) configurations.

Standard Configurations
There are three basic types of Teflon back-up rings in use: single turn (scarf cut), multi-turn (spiral cut) and solid (uncut) configurations.

The combination of high pressures and high temperatures is a common occurrence in present day fluid systems. Moreover, the trend is toward still higher pressures and longer resident times at elevated temperatures. This places more emphasis on the role of the back-up ring in preventing o-ring extrusion.

Another variable that must be considered in determining the need for back-up rings is the operating temperature. Elevated temperatures (160 degrees F and higher) impose a severe burden on the physical and mechanical properties of rubber o-rings which further increases their tendency to extrude.

The degree of extrusion is a function of o-ring hardness, clearance of mating parts and fluid pressure.

Function of Teflon Back-Up Rings
Teflon back-up rings are designed to prevent extrusion in rubber o-ring sealing systems.
Rubber O-Rings generally serve as effective seals for dynamic and static applications in hydraulic and pneumatic systems equipment. One big drawback of such o-rings is their tendency to extrude into the clearance of mating surfaces when subjected to increasing pressures.

Teflon back-up rings are designed to prevent extrusion in rubber o-ring sealing systems.
Rubber

  • Style:Hydraulic
  • Country:United States
  • telephone:1-714-556-4931
Style: Hydraulic
*Your name:
*Your Email:
*To:All Seals Incorporated
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

BRT Back Up Ring Fits Excavator

BRT PTFE Back Up Rings Fits Excavator BRT type PTFE+copper powder material Seal ring back support ring. BRT back up ring seal series materials are: PTFE-polytetrafluoroethylene material and copper powder polytetrafluoroethylene. The addition of copper powder PTFE has higher ...

Come From Guangzhou Sanping Machinery Co., Ltd.

Sanping Back Up Ring

Sanping Back Up Ring China buck up ring seal is a thin ring designed to prevent the O-ring from extruding under pressure. They are installed in the gland between the seal and the gap to provide zero gap. Types of Backup Ring Seals BRT Back Up Ring Fits Excavator N4W Back Up ...

Come From Guangzhou Sanping Machinery Co., Ltd.

005M310, Mako o-ring / back up ring kit Replacement

005M310, Mako o-ring / back up ring kit Replacement Emergency Sales and Service provides you with original Champion air compressor parts at a very competitive price. Get high-quality compressor parts that suit your industrial requirements. Select from a wide range of product ...

Come From Emergency Sales and Service