Our Low torque bonnet seal is a bore type seal assembly that not only extends into the intermediate flange but is also captured in the machine bore in the body face. The bonnet seal is independent, does not depend on the bonnet torque. It greatly reduces torque requirements for bonnet bolts, thus extends the bonnet bolt thread life.
Our Low torque bonnet seal is a bore type seal assembly that not only extends into the intermediate flange but is also captured |
Minimum Opening Angle 23° Maximum Turning Angle 100° Maximum Temperature 95°C Lever Break Torque ≥12N.m Tightening Torque 8-10N.m Specification of 40D-1 40MM Ceramic Disc Cartridge Pressure VS Average Flow Rate P. (bar) 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 F. (I/min) 11.2 16 19.6 ...
Wanhai Cartridge 25H-1 25mm Low Torque Cartridge with Distributor Minimum Opening Angle 21° Maximum Turning Angle 100° Maximum Temperature 95°C Lever Break Torque ≥12N.m Tightening Torque 8-10N.m Specification of 25H-1 25mm Low Torque Cartridge with Distributor Pressure VS ...
Wanhai Cartridge 25D-1 25mm Low Torque Cartridge Minimum Opening Angle 21° Maximum Turning Angle 100° Maximum Temperature 95°C Lever Break Torque ≥12N.m Tightening Torque 8-10N.m Specification of 25D-1 25mm Ceramic Disc Cartridge Pressure VS Average Flow Rate P. (bar) 0.5 ...