RMG
Identical to MG1, but with a special bellows surface on the shaft side. For use in hot-water pumps at up to 120oC and 25 bar and/or 140oC/16 bar. Only in
combination with seat G 606. d1=12~38 mm.
TMG1S20
Dimensions, items and designations same as for TMG1, but with an extended bellows tail to achieve the special fitting length l1S in combination with seat G50.
TMG13
Dimemsions, items and designations same as for TMG1, but with an extended bellows tail to achieve the fitting length l1N according to DIN 24960 in combination with seat G6 or G60.
TMG12
Dimensions, items and designations same as for TMG1, but with an extended bellows tail to the fitting length l1K according to DIN 24960 in combination with seat G6 or G60.
Mechanical seal of the TMG series are amongst the most commonly used. The bellows is not subject to any torsional stress and its ingenious design incorporates several functions, as seal face carrier, secondary sealing element and drive collar. The seal face is driven through the spring and the L-ring. There are no bonded joints and all the face materials are interchangeable without having to modify any dimensions. Highly recommended for duties with media containing solids eg. in waste water and sewage applications.
TMG1 TYPE (UNBALANCED) ELASTOMER BELLOWS |
Types of Elastomer Bellow Mechanical Seals Designed by single or double, Hangzhou SEALCON supply standard and OEM elastomer bellows seal to suit different applications and media in various industries with a variety of suitable materials. Most of SEALCON rubber bellow seals can ...
Types of Elastomer Bellow Mechanical Seals Designed by single or double, Hangzhou SEALCON supply standard and OEM elastomer bellows seals to suit different applications and media in various industries with a variety of suitable materials. Most of SEALCON rubber bellow seals can ...
Elastomer mechanical seal R24 Replacement for: Burgmann 560 Features: Single-Spring Inch size available Performance Capabilities of Elastomer Bellow Seals R24 Temperature: -20℃ to 150℃, dependent on the elastomer Pressure: Up to 8 bar Speed: Up to 10 m/s End play/axial ...