Pressure sealing hand pumps

(8) a set of air supply quick joint

(7) a compressed air pipe (amide)

(6) a high-pressure hose with a length of 5 meters; 

(5) Quick joints

(4) a gauge stand joint (3 joints)

(3) a manometer and a joint pipe; 

(2) an air-powered hydraulic pump

(1) a mechanical reposition filling gun; 

Includes:

4. Air-powered hydraulic filling tools USD 1088

 

(8) oil return pipe joint

(7) oil return pipe    

(6) a gauge stand joint 

(5) a manometer 

(4) High-pressure rubber tube 

(3) Cross valve 

(2) Hydraulic oil pump by hand 

(1) Hydraulic reposition injection gun

Includes:

3. Hydraulic reposition filling tools: USD 624

 

(4) a gauge stand joint (3 joints)
(5) Two quick joints
(6) a high-pressure hose (soft pipe)

(1) an TXY-II Model Mechanical rod-return injection gun (fills continuously)
(2) a hydraulic oil pump by hand (0-60Mpa)
(3) a manometer (0-60Mpa)

2. TXY-II mechanical reposition injecting tool: USD 815
include:

 

(4) a gauge stand joint (3 joints)
(5) Two quick joints
(6) a high-pressure hose (soft pipe)

(1) Mechanical rod-return injection gun
(2) a hydraulic oil pump by hand (0-60Mpa)
(3) a manometer (0-60Mpa)

1. TXY-I mechanical reposition injecting tool: USD 725

 

Special tools

 Series of special tools and discreteness for injecting sealant

Working Principle
1> To add oil. When starting work, the oil is pressed through one-way valves of low pressure and high pressure into the tube connected with the selant injection tool.
When the pressure achieves over 1Mpa,the low pressure valve is opened and through the valve returns the oil in the low pressure tube back into the oil tank.

2> To raise pressure: as the high pressure plunger works, pressure increases until it reaches 70 Mpa. At this pressure unit, the high pressure valve, acting as the security valve,returns to the oil tank and thus,the pressure remains 70Mpa.

3>to use it.Asthe flunger does work, the energy decreases. So please keep pressing the handle in order to keep the pressure lingering at the required level until the work is completed.

4> to release pressure: after work, as release valve is opened, the pressure decreases gradually to 0 Mpa and the oil goes back to the oil tank.

In fact,the 4 steps mentioned above are indispensible and what you need to do is to keep pressing the handle to complete the process.

Capability and specification
Portable manual lubropump P-72
Pressure High pressure Mpa 70
Low pressure 1
Flux High pressure cm3/time 3.1
Low pressure 12.5
Maximum pressure on the handle kg 44.00
Weight kg 4.0
Size(length x width x height) mm 612x140x141
Output volume of oil cm3 902

3.

Brief:
P-72manual lubropump is a kind of hydraulic power unit which transfers mechanical energy generated by hand into power created by the pressure of oil inside the pump
P-72 enjoys a variety of merits:
1>generating power by hand
2>creating high pressure by pressing the handle with relatively less strength than usual
3>light enough to carry
4>small size
5>widely used in many fields

2.

1.

Detailed Product Description

Hand Pumps

Hand Pumps For Leak Sealing. Leak Sealing Hand Pump

  • Hand Pumps:Hand Pumps
  • Style:Mechanical Seal
  • Country:China (Mainland)
  • telephone:86-22-23301140
Delivery Time: Hand Pumps
Package: Leak Sealing Hand Pump
Minimum Order Quantity: Hand Pumps
Payment Terms: T/T
Port: Tianjin Port
Hand Pumps: Hand Pumps
Style: Mechanical Seal
*Your name:
*Your Email:
*To:Tianjin Xiangyue Sealing Material Co., Ltd.
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

low pressure heater drainage pump

NW Low pressure heater drainage pump NW type drainage pump for low pressure heater is used for conveying the water in low pressure heater for power station. The temperature of liquid transported is not over 120 degrees Celsius except 150NW-90X2 type pump, for which the ...

Come From Kenshine Pump And Valve MFG Co.,LTD

ZJ slurry pump spare parts-the difference between mechanical seal cartridge type and non-cartridge type

One type of shaft seal for slurry pumps is mechanical seals, but mechanical seals are divided into cartridge mechanical seals and non-cartridge mechanical seals. Today we will talk about the differences between these two types of machinery. Cartridge mechanical seals combine ...

Come From Pansto Pump Co., Ltd

ZJ series slurry pump seal failure

ZJ series slurry pump seal failure can be divided into initial type, wear type or random type. Statistically speaking, random failure, also called accidental failure, is the main type. Initial failures are usually caused by incorrect seal selection, installation or startup, and ...

Come From Pansto Pump Co., Ltd