Design Feature:
a. Conical single type.When spring drive,Depend on direction of rotation.
b. Looking at rotary ring from stationary one,call it (R) that shaft rotates clockwise,on the contrary call (L).A right (left) handed spring must be fitted to a right(left) handed shaft.
c. According to the different conditions,packing can select rubber O-ring,or PTFE V-ring (T).
d. Conform to ISO3069,DIN24960 and GB6556 standard.
e. Besides the G9(DIN24960),other stationary ring like the type of BUGMANN can also be offered.
Application Condition:
Temperature: -20~220
Pressure: 0~1.0MPa
Viscosity:1500CP
Select seal face materials from the table 3
Medium: water,oil,crystallization acid,alkali,salt organic solution etc.
Pump Seal,Mechanical Seal
Pump Seal,Mechanical Seal Medium: water,oil,crystallization acid,alkali,salt organic solution etc. |
One type of shaft seal for slurry pumps is mechanical seals, but mechanical seals are divided into cartridge mechanical seals and non-cartridge mechanical seals. Today we will talk about the differences between these two types of machinery. Cartridge mechanical seals combine ...
Come From Pansto Pump Co., Ltd
ZJ series slurry pump seal failure can be divided into initial type, wear type or random type. Statistically speaking, random failure, also called accidental failure, is the main type. Initial failures are usually caused by incorrect seal selection, installation or startup, and ...
Come From Pansto Pump Co., Ltd
We have mentioned before that there are three types of shaft seals for slurry pumps: packing seals, impeller seals, and mechanical seals. Among them, the packing seal is the most common in our use because of its simple structure, low price, and reliable operation. Therefore, in ...
Come From Pansto Pump Co., Ltd