Standard StyleFace Material:Carbon,Ceramic(99.5%)Silicon CarbideTungsten CarbideMetal Parts:AISI 316, 304Secondary Seal:SV L : Elastomer's 'O' RingSV S : PTFE WedgeOperating Limits:Shaft Diameter d1: 14...100mmPressure P : 10 barTemperature t : -60...+200
These type of seals with single helical coil spring is developed for dirty media and clogging type applications.
Standard or Nonstandard: | standards |
Model Number: | SV 07/S |
Brand Name: | sil vex |
Place of Origin: | Maharashtra India |
Material: | s.s 304& 316 |
Style: | mechanical seals |
Y-shaped sealing rings are widely used in reciprocating sealing devices, and their service life is longer than that of O-shaped sealing rings. The applicable working pressure of the Y-shaped sealing ring is not greater than 40MPa, and the working temperature is -30~80℃; ...
Come From Pansto Pump Co., Ltd
The O-type sealing ring is a rubber sealing ring with a circular cross-section. Because its cross-section is O-shaped, it is called an O-type rubber sealing ring, also called an O-ring. It began to appear in the mid-19th century, when it was used as a sealing element for steam ...
Come From Pansto Pump Co., Ltd
The O-ring is an extrusion seal. The basic working principle of the extrusion seal is to rely on the elastic deformation of the seal to cause contact pressure on the sealing contact surface. If the contact pressure is greater than the internal pressure of the sealed medium, ...
Come From Pansto Pump Co., Ltd