O-Ring
Product Details
Material: NR, NBR, HNBR, EPDM, Silicone, and VITON
The sealing action of the O-ring is based on the axial or radial deformation of its cross-section in the installed state. This deformation is achieved by proper design of the housing. The ensuing reaction force gives the contact pressure which is necessary for sealing, and this is additionally supported by the pressure of the medium.
All kinds and dimensions of O rings
- ISO 9001:2000:RoHS
- Model Number:all dimensions
- Brand Name:SUPTEX
- Place of Origin:Turkey
- Country:Turkey
- telephone:90-232-4350608
| ISO 9001:2000: | RoHS |
| Model Number: | all dimensions |
| Brand Name: | SUPTEX |
| Place of Origin: | Turkey |
Send inquiry / quota request to O-Ring
Relate products of O-Ring
The O-type sealing ring is a rubber sealing ring with a circular cross-section. Because its cross-section is O-shaped, it is called an O-type rubber sealing ring, also called an O-ring. It began to appear in the mid-19th century, when it was used as a sealing element for steam ...
Come From Pansto Pump Co., Ltd
The O-ring is an extrusion seal. The basic working principle of the extrusion seal is to rely on the elastic deformation of the seal to cause contact pressure on the sealing contact surface. If the contact pressure is greater than the internal pressure of the sealed medium, ...
Come From Pansto Pump Co., Ltd
The O-rings of horizontal slurry pumps can be divided into static seals, reciprocating seals, rotating seals and switch seals according to the relative movement state between the seal and the sealed device. According to the compression amount (tightness) of the O-ring ...
Come From Pansto Pump Co., Ltd
