PU Timing Belt,Timing Belt,PU Ended Timing Belt

   XL   L  H   T5  T10   HTD-5M  HTD-8M   H

Polyurethane Timing Belt Type:

Seamless Polyurethane Timing Belt is excellent applied to low-load synchronous hierarchical transmission, such as office automation systems and home appliances

Chemical Property
- Anti Aging, Anti Hydrolyze ,Anti UVAAnti-Ozone
- Work Temperature-30+80  The Max.degree within short time can bear +110
- Anti-oil and anti-ester
- Anti acid,alkaline cautery resistance

- Top linear speed

- Small Noise
- Wear Out Resistance
- No need to maintain
- Excellent Elasticity

Polyurethane belt perforamance are as below:
Mechanism Property
- Stable Dimension
- Low Pull

Above properties made the polyurethane transmission  belt  have higher physical  and chemical stability.
Seamless Polyurethane Timing Belt is applied to high strength ,high accuracy even high speed transmssion system.

Small tolerance of polyurethane endless transmission blet ensured the accuracy of thickness and length.

The steel cord increased the belt strength and tensile resistance made the belt has good dimensional stability

Excell polyurethane material made the belt has wear out resistance and tear resistance performance.

Polyurethane endless transmission belt is made from special molding process.

Polyurethane tooth should be high  resistance shear strength,excellent in resistance wear out and anti-oil.The requirement for pitch array of tooth is very high,the belt tooth should be mesh with pulley correctly,therefore,the correction requirement for tooth geometry parameter is considerable strictly.The polyurethane timing belt is famous for excellent oil resistance and wear out resistance which is suit for the medium power high speed condition, the entironment should be comparative dry and the running temperature is at -20+80 C.

 (3) Polyurethane Tooth

The tensile layer is the tensile component of timing belt for which transfering the power and ensuring the pitch wont be changed during running.Multi-strand steel cord) or terylene cord ) spiraled around the fabric along the rubber belt width,it defines as pitch .The tensile layer must be high tensile strength and bend fatigue strength resistance.Large elasticity moduls and non-stretched feature ensure the pitch cant be changed.

 (2) Tensile Layer-Steel Cord( or terylene cord)

The backing of timing belt is to cover with felt the tensile component.the capability is excellent in flexibility and resistance bent fatigue as well as anti-aging,oil resistance, wear out resistance.At the inner surface of the backing has appropriate shap grooves,with the exception of carfts requirements,but also it can improve the bent fatigue properties of tooth and evacuating the air between belt and tooth while in the process of running so that eliminating the noise.

 (1) Polyurethane Backing

PU Timing Belt,

PU Timing Belt
Type#: XL,L,H,T5,T10,
HTD5M,HTD8M,H