Modular Control Valves

Modular check valve:1. Modular check valve is widely applied in all kinds of circuits.2. Simple and compact, has two cracking pressures to meet system requirement.Modular pilot operated check valve:1. Modular pilot check valve is used to prevent actuator self-running and to maintain actuator position.2. Max. Pressure is 250 kgf/cm2.Modular relief valve1. Mrv series modular relief valves provide maximum pressure control of hydraulic circuit.2. Wide range of operating pressure, adjusting range from 8 to 250kgf/cm2.3. Wide range of applicability, max. Pressure 250 kgf/cm2.Modular reducing valve1. Modular reducing valves makes the pressure in part of the circuit lower then that of main circuit.2. Even when pressure changes in the primary main circuit, then secondary reduced pressure is maintained at the constant level.3. Max. Pressure 250 kgf/cm2.Modular throttle valve1. Mt series throttle valve is not included check function, could be restrict flow for both direction. Mct series is included check function and could be use as one way throttle valves.2. Many different control ports could be applied in different circuit.3. Max. Pressure 250 kgf/cm2.Modular throttle and check valve1. Mtc series throttle valve is used to control the speed of actuator and for other flow control applications.2. Wide range of control ports could be applied in different circuit.3. Max pressure 250 kgf/cm2.Solenoid operated throttle valve1. Mst series throttle valve is solenoid controlled throttle valve. When solenoid is off, the flow is not restricted by the throttle valve. When solenoid is on, the flow will be restricted by the throttle valves.2. Four kinds of coils in different voltages could be chosen according to system requirement.Modular two section reducing valve1. This valve reduce the main pressure to lower pressure circuit in first section, and controlled the low pressure circuit into higher or lower pressure in the second section controller.2. Even when main pressure changes, the secondary reduced pressure is maintained at the constant level.3. Max pressure 140 kgf/cm2.Modular sequence valve:1. This is a pressure control valve and applied in sequential actuator operation and for maintaining the main circuit pressure.2. Wide pressure adjusting range, from 8 to 250kgf/cm2.3. Max pressure 250 kgf/cm2.Modular counter balance valve1. Counter balance valve is mostly applied in actuator back pressure control and other pressure control valve application.2. Wide pressure adjusting range, from 8 to 250 kgf/cm2.3. Max pressure 250 kgf/cm2.Modular balance valve1. Mrb balance valve is a combined the function of pressure reducing and counter balance.2. Use only one handle to adjusting the pressure.3. Mounting way is similar like g02 solenoid valves.4. Max pressure 250 kgf/cm2