ASEPCO Tank-Bottom Valve Specifications
Material 316L, AL6XN, Hastelloy
Method of Manufacturing Machined from solid, hot-rolled, bar stock
Sizes 1/2 through 4
Outlet Connections Hygienic clamp, tube end,and others available
Maximum Pressure 250 psi
Maximum Temperature 135?C/275?F
Packaging All valves are separately packed in foam packing
Marking Each valve is marked for full material traceability
ISO All product and procedures are governed by our ISO Quality Assurance Program
Non-Standard Custom Products Please contact our Customer Service Department for any non-standard valve requirement
Standard BPE, CE-PED, ASME
In addition, the Flush Tank Valve can be ported to allow it to be C/SIP or flushed while closed,
providing access through the valve body to the downstream lines. The ability to quickly flush
or C/SIP while the valve is closed solves downstream problems simply and speeds the product changeover.
Features & Benefits
The only truly flush diaphragm tank valve
Has no pocket, unlike other designs
Completely drainable
Welds flush to tank bottomeliminates gaskets, bolts, and seams
An award winnerInnovation in Pharmaceutical Processing Award: Bioprocessing & Injectable Drug Manufacturing
Meets ASME code requirements
Delivered with material test reports (MTRs)
Serialized and stamped with a unique heat number
Uses a simple clamp for disassembly and inspection, needs no tools
Uses a Radial-Diaphragm designreliable seal, easily cleanable
Reliable deliveryyour project stays on time
Saves 85% of routine maintenance cost over weir valves, forever
The ASEPCO Flush-Mounted Tank Valve is used as original equipment by the two largest U.S. bioreactor manufacturers, and it is experiencing growing popularity in the food and chemical industries. See the drawing to understand why the most forward-thinking engineers in aseptic processing have made ASEPCO valves a standard.
ASEPCO Flush-Mounted Tank Valves
FREE-VALVE’s Tank Bottom Angle Valves are designed for the convenient and fastdischarging the material or samples from the bottom of the reactor,drain or feed vessel .The valve can be welded or installed on the vessel through the flange at the bottom of the valve , tank ...
CV3434M, Puma 3/4\" MPT X 3/4\" FPT Check Valve, In-Tank Are you searching for Puma Pump Parts? The Puma pump parts are designed specifically for standard duty applications. It is widely recognized for its low installation costs, problem free operation, stringent hygiene ...
Come From Emergency Sales and Service
FREE-VALVE’s fluorine lining tank bottom angle valves are designed for the convenient and fast discharging the material or samples from the bottom of the reactor,drain or feed vessel .The valve can be welded or installed on the vessel through the flange at the bottom of the ...