After your registration is complete, you will be returned to this page. with your registration credentials to access technical documents.
Technical Details are accessible to Registered Users only. Registration is free. Click to register and access all Techcon System technical documentation.
|
TS1201 | TS1212 |
Size W x H: | 1.44 x 4.81 ( 37mm x 122mm) | 3.3 NOM x 2.44 (83mmx62mm) |
Weight: | 0.08lb (36g) | 0.18lb (82g) |
Fluid Inle: | Female Luer Lock | Female Luer lock |
Fluid Outle: | Male Luer Lock | Male Luer lock |
Mounting: | Hand held | 1/4-20UNC-2B |
Maximum Fluid Pressure: | 60psi (4.1bar) | 60psi (4.1bar) |
Wetted parts: | Polyethylene, optional polyurethane | Polyethylene, optional polyurethane |
Cycle Rate: | - | Exceeds 400 cycles/minute |
Material Viscosity Range: | 1 45,000cps | 1 45,000cps |
Warranty: | 1 year | 1 year |
TS1201 Recommended Pressure Tank:
Recommended Controller: , , in conjunction with
The only part of the valve making contact with the fluid being dispensed is the disposable pinch tube assembly making the TS1212 and TS1201 ideally suited to dispensing 2-part and CA (Cyanoacrylate) materials.
Disposable Pinch Tube Valves provide control for continuous or micro shot applications of low to semi-viscous fluids. The TS1212 semi-automatic version relies on a dispensing controller sending
a pre-programmed air signal that opens the valve and allows fluid to flow. Once the dispense cycle is complete, the air signal stops and the internal spring forces the shut-off piston to
"pinch" the disposable feed path, preventing further fluid flow. The TS1201 is a hand-hand version that works on a similar principle - the operator takes the place of the dispensing controller
by pressing and releasing the finger lever to start/stop the dispense cycle. Both versions have a built in flow rate adjustment
Disposable Pinch Tube Valves
Disposable Pinch Tube Valves provide control for continuous or micro shot applications of low to semi-viscous fluids. The |
Pinch Valve is made up of two parts: the upper side is the body, and the lower side is the connection that can hold the pipe. Keyto mini pinch valve, small pinch valve has three series. The mainly different is the port size. The port size means the pipe diameter you want to ...
Come From SHENZHEN KEYTO FLUID CONTROL CO., LTD.
micro pinch valve is made up of two parts: the upper side is the body, and the lower side is the connection that can hold the pipe. Keyto pinch valve has three series. The mainly different is the port size. The port size means the pipe diameter you want to use. In addition to ...
Come From SHENZHEN KEYTO FLUID CONTROL CO., LTD.
Micro pinch valve is made up of two parts: the upper side is the body, and the lower side is the connection that can hold the pipe. Keyto miniature solenoid pinch valve has three series. The mainly different is the port size. The port size means the pipe diameter you want to ...
Come From SHENZHEN KEYTO FLUID CONTROL CO., LTD.