Gate Valves

                  *4-6 double disc

                  *2-3 resilient wedge

                   2360-6 FLG X FLG                               

                   2360-37 PVC X PVC (IPS)   

2360-16- 9020 MJ X FLG

**** Gland pack and Anti-Rotation bolts must be used on valves.                           Pressure-250 PSI (hydrostatic tested at 500PSI) Connection Options:

2360-20     MJ X MJ                                               

Opening- Can be done w/hand wheel or 2 square nut.

Body-Epoxy coated

 Wedge- Cast Iron fully encased in rubber.

Two anti-friction washers

         * Two above collar can be replaced with valve fully open under pressure

Triple O-ring seal-Retains lubrication on thrust collar. (Two above collar and one below collar)

Features:     

Size: 2 - 12 

Use Main line valve on high-pressure systems. Limited use as head gate on irrigation (dirty-water) systems because of their epoxy coating. This gives them a longer life. Valves will be buried below frost line, accessible by a Valve Box. 

 MFG. # A-2360 

                          14" - 20" -----50psi

       Dead-end     2 12-------75psi

                          14 20-----150psi             

      Bi-directional 2 12-----175 psi

Pressure:

Stock: 3 12 

Size: 2 20 

Body: Cast Iron. 

Installation: Placed between (2) flanges and tighten bolts holding valve inline. No gasket is necessary.  Valve is placed in line partially open and then fully opened before tightening bolts to insure proper alignment. 

Use: Shut-off for fluid. Sometimes used on swimming pools and indoors. Uses fluid on both sides of flapper to seal valve. For dead-end service the pressure rating drops.  

If an automatic control valve is what you're looking for, we proudly sell and services Cla-val brand regulators and surge relief valves, in additition to their full line of specialty valves.  problems with air trapped in your pipeline?  We have a Val-matic air release valve to meet your needs.  give us a call, chances are we can provide the solution to your valve needs.

Grand Junction Pipe and Supply Co. is the only authorized distributor for Mueller valves and fire hydrants on Colorado's Western Slope.  We stock the full line of the new resilient wedge gate valve as well as the fire hydrants required by local fire protection codes.