Springfield Controls SC34 Pressure Control Valve / Regulator

The Springfield Controls Type SE34 precision air regulator controls output pressure with accuracy of 0.1% and has very
low sensitivity to changes in supply pressure and flow. The accuracy, precision control, and repeatability are unmatched
by any other self-contained regulator in the world. The Type SE34 relieving regulator requires no readjustment after long
down time periods and works particularly well in dead end service applications when little or no flow is required. Small
compact size still provides flows up to 14 SCFM. The maximum inlet pressure is 150 PSI. The unit may be installed in any
position by in-line plumbing or panel mounting. Set point lock nut is provided as well as two gauge ports (front and rear).
Typical applications include: web tensioning, roll loading, valve operators, calibration stands, cylinder loading, air brakes,
clamp and press units.
Port Size: 1/8" 1/4 NPT female inlet & outlet, 1/4" NPT female gauge port
Pressure Range: 2120 PSIG
Flow Capacity: 14 SCFM (100 PSIG Supply, 20 PSIG Outlet)
Maximum Supply Pressure: 150 PSIG (pneumatic only)
Minimum Regulated Pressure: 2 PSIG
Sensitivity: 1/8 inch water column
Exhaust Capacity: 2 SCFM (outlet 5 PSI above 20 PSI set point)
Supply Pressure Variation: Less than .005 PSIG @ 25 PSIG variance
Bleed Rate: 0.08 SCFM
Housing Material: SS316 , NACE
Diaphragms/Capsule: Buna-n, stainless
Adjustment Knob: Phenolic plastic w/fine thread screw
Mounting: In-line plumbing or panel mount (nut included), any position