Air Poppet Valve

Product Model :VAPrevent mold damage due to ejection problems with deep drawor thin-walled parts.More durable and precision made than competitive units.All dimensions shown are in mm.?8?6?6.6?12?18?12?14.8 420 Stainless Steel, heat treated and titanium nitride treated.MOLD CLOSED.NOTES:1.Pressure to air line of air poppet valve and machine ejection should beactivated at the same time. This allows valve to relieve negative pressurebuild up (vacuum) in the cavity during part ejection.2.The air flow to the poppet valve must be fully relieved to the atmosphereafter each cycle to insure that the poppet valve closes before the nextinjection cycle. Material injected into a partially open poppet valve couldcause damage to the valve and /or the mold. Control valves and limitswitches to be supplied by moldmaker and / or molder.3.The air poppet valve should never be used as the sole means of part ejection.Material shrinkage and other factors will not allow it to be used as analternative to ejector pins or stripper

  • Country:Taiwan
  • telephone:886-886-7-3511963
Product Model :VAPrevent mold damage due to ejection problems with deep drawor thin-walled parts.More durable and precision
*Your name:
*Your Email:
*To:THOMAS CO.,LTD.
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

ISV08-22 Poppet 2-Way N.C. Solenoid Valve

ISV08-22 Poppet 2-Way NC Solenoid Valve A solenoid-operated, 2-way, normally closed, poppet-type, screw-in, hydraulic cartridge valve, designed to function as a load holding or blocking valve in applications requiring low internal leakage. Specifications of ISV08-22 Poppet 2 ...

Come From Wuhu Inno Hydraulic Technology Co.,Ltd

SV08-20 Poppet 2-Way N.C. Solenoid Valve (Standard)

ISV08-20 Solenoid Operated Poppet Valve (Standard) A solenoid-operated, 2-way, normally closed, piloted poppet-type, screw-in hydraulic cartridge valve, intended to act as a blocking or load-holding device for low flow circuits. Specifications of ISV08-20 Poppet Solenoid Valve ...

Come From Wuhu Inno Hydraulic Technology Co.,Ltd

ISP08-20 2-Way N.C. Poppet Valve

ISP08-20 2-Way N.C. Poppet Valve A proportional solenoid-operated, two-way, normally closed, poppet-type, screw-in hydraulic cartridge valve for low-leakage blocking and load-holding applications. Specifications of ISP08-20 2-Way N.C. Poppet Valve Operating Pressure 250 bar ...

Come From Wuhu Inno Hydraulic Technology Co.,Ltd