Pluse valve
Product Details
- At present there are three types of valves used in pulse: rectangular pulse valve, pulse valve submerged, and the direct pulse valve.
- The general theory of pulse valve: electromagnetic pulse valve is controlled in accordance with electrical signals unloading valve opening and closing holes, unloading valve, the valve after the chamber pressure of gases, chamber pressure before the valve is diaphragm gas pressure on the Yin Kong reduce expenses, diaphragm is lifted, the pulse injection valves. when valve Stop unloading , the pressure of gas through the damping holes filled quickly after the valve cavity, due to membrane force on size difference of both sides of the body, in the latter valve chamber, the gas force large diaphragm can close port injection valve reliably pulse valve stop blowing. Electrical signal is millisecond timing, when pulse valve opening, it have a strong impact on air, in order to achieve an instant injection.The above is pulse valve's basic theory, but they are as different and that some kind of difference I have all kinds of pulse valve below the basic theory of narrative as follows:
- First, Submerged pulse valve works principle: diaphragm divided Electromagnetic pulse valve into before and after the two air chamber, when connected to compressed air, the compressed air through the orifices into the latter chamber, this time the latter chamber pressure is to close the valve diaphragm component output port, electromagnetic pulse valve is in the "off" state. Signals of Pulse injection control apparatus make the electromagnetic pulse valve armature retract. chamber vent valve chamber open, air chamber loss pressure rapidly, membrane component is moved, the compressed air through the valve inject output portion, electromagnetic pulse valve in the "open" state. Pulse injection controller signal disappear, the electromagnetic pulse valve armature reset, latter gas chamber placed stomatal closed the latter chamber pressure increases to make the valve diaphragm to close component output, the electromagnetic pulse valve also in the "off" state. (Electromagnetic pulse valve DSF-Z electromagnetic pulse valve) for right-angle type pulse valve, the angle between imports and exports is 90 degrees, which applies to reservoir pump with the installation of dust blowing pipe connections, flow air, can provide to meet the requirements of the pulse Cleaning Air. Electromagnetic pulse valve is switch of pulse bag filter cleaning compressed air injection system , By the controls of the output signapulse of injection controller to the bag-by-row (room) injection cleaning, so that the resistance to keep dust within the scope of the set to, ensure that the processing power and dust collecting efficiency.
- Second, straight-through pulse valve works principle: TMF-T (DFM-T) type of electromagnetic pulse electromagnetic pulse valve is straight-through valve, the angle between imports and exports is 180
1.Easy installation
2.Good sealing
3.Quick response
- Model Number:1'',1 1/2'',2'',2 1/2''
- Brand Name:KH
- Place of Origin:Jiangsu, China (Mainland)
- Standard or Nonstandard:Standard
- Country:China (Mainland)
- telephone:86-515-88566658
| Delivery Time: | Satisfy the customer request |
| Package: | 1.As to the requirement of the equipment features,transport and unloading,the weight,hoisting hole place are marked on the neighboring side faces of the each packing in English, which is convenient to move. "Handle with Care, Keep Upright, and Rain Tight" and others in the general rules of international trade in English is marked on the packages.2.The neighboring side faces of the each packing should be marked in black paint or oil clearly,the mark is done as the client's requirement. |
| Minimum Order Quantity: | 10 Piece/Pieces |
| Payment Terms: | L/C,T/T |
| Model Number: | 1'',1 1/2'',2'',2 1/2'' |
| Brand Name: | KH |
| Place of Origin: | Jiangsu, China (Mainland) |
| Standard or Nonstandard: | Standard |
Send inquiry / quota request to Pluse valve
Relate products of Pluse valve
R610/R640/R650 Series China Self-operated Control Valve
A self-operated control valve, also known as a self operated pressure control valve or self operated temperature control valve, is an auto control valve that relies on the pressure and temperature of the medium flowing through the valve as an energy source to drive the self ...
Come From Utmost flow control technology Co., Ltd
Electric Ball Valve, ASTM A216 WCB, 4 Inch, 150 LB, API 6D
Product Item: Electric Ball Valve. Material: ASTM A216 WCB. Size: 4 Inch, DN100. Pressure: Class 150 LB, PN20. Design Standard: API 6D. For ...
Come From China Ball Valve Manufacturer Co., Ltd.
ASTM A182 F316 Ball Valve, API 6D, 4 Inch, DN100, 150 LB
Product Item: Ball Valve. Design Standard: API 6D. Body Material: ASTM A182 F316. Nominal Diameter: 4 Inch, DN100. Pressure: Class 150 LB, PN20. Working temperature: -29℃ to +120℃. Face to Face: ASME B16.10. Test and Inspection: API 598.For ...
Come From China Ball Valve Manufacturer Co., Ltd.
