Water Softening Equipment

Pour Over & Direct Connect Microbar Pre-Installation Checklist
Water Requirements Waterline for Direct Connect only
1/4 to 3/8 dedicated cold water line with shut-off
valve and compression fitting.
Water hardness cannot exceed 3gpg or 50ppm. If
water hardness exceeds 3gpg a water softener must
be installed.
Minimum incoming water Flow Rate of 35 GPH and
maximum line pressure 36 PSI / 2.5 BAR.
Power Requirements
Volts: 110 (voltage range of 110125)
Watts: 1500
Amp draw: 13
Receptical: Nema 5-15
Water Softening Equipment
1. Water Softener Capacity: Single - 4400 gpg
2. Water Softener Capacity: Double - 8800 gpg
3. Water Softener Capacity: Triple - 13200 gpg
4. Water Softener: Automatic - Programmable
5. Water Softener Capacity: Manual - 4400 gpg
Water Softener/Maintenance Calculation:
Cartridge Grain
Capacity