POLE ANCHOR


 

POST EXTENDER
THIS POST EXTENDER ENABLE TO INCREASE THE HEIGHT OF ANY EXISTING
FENCE,IT IS RECOMMENDED TO RAISE THE HEIGHT OF THE EXISTING FENCE UP
TO MAX.1 METRE.

REPAIR SPUR
THIS SPUR PROVIDES THE SOLUTION TO FENCE POSTS WHICH HAVE BROKEN OFF
IN AN EXISTING SOUND CONCRETEBASE.IF THE POSTA BROKEN OFF AT GROUND
LEVEL,THE REPAIR SPUR CAN BE HAMMERED DIRECTLY INTO THE BASE OF THE
ROTTEN/BROKEN POST,AND INSTALL A MEW TIMBER POST

POLE ANCHOR(CONCRETE-IN)
THIS ANCHOR HAS BEEN DESIGNED FOR USE IN HARD STANDING AREAS. LAID IT
 IN THE WET  CONCRETE FOR ENOUGH STRENGTH.
THE ANCHOR IS IDEAL FOR CAR PORTS,PERGOLAS AND GENERAL FENCING
APPLICATION

POLE GROUND PLATE FLUSH(BOLT-DOWN FLUSH)
THE BOLT-DOWN FLUSH IS USED IN THE SAME CIRCUMSTANCESAS BOLT-DOWN,IT
CAN ALSO BE MOUNTED AGAINST A WALL.
THIS GROUND PLATE IS EASY TO INSTALL,JUST DRILL HOLES IN THE CONCRETE
BASE,FIXED TO THE BASE

POLE GROUND PLATE(BOLT-DOWN):
THIS GROUND PLATE IS IDEA WHERE CIRCUMSTANCES DO NOT ALLOW THE
ANCHOR TO BE DRIVEN INTO THE GROUND,SUCH AS CONCRETE BASE,OR ON
DECKING,THIS BOLD-DOWN GIVES THE GOOD SOLUTION. IT CAN BE THE SUPPORT FOR PATIO FENCING,ROSE ARCHES ETC.

SIZE:
DIA.AVAILABLE25MM,38MM,43MM,50MM,55MM,65MM

SCREW-IN EARTH SLEEVES
THIS MEW SCREW-IN EARTH SLEEVE WITH FIVE DIFFERENT PLASTIC ADAPTER
SLEEVES WHICH SUITABLE FOR A TUBE FORM 25-65MM,THIS SYSTEMMAKES IT
HAS A WIDE PURPOSE OF USES.INSTEAD OF HAMMER INTO GROUND,IT GOES INTO
GROUD EASILY WITH THE SPANNER-BAR.

SCREW-IN ANCHOR:
INSTEAD OF HAMMER INTO GROUD,THIS MEW SCREW-IN ANCHOR GOES INTO GROUND
EASILY WITH THE SPANNER-BAR.

System available
(1)  Standard: with two holes on the socket, when erect, put the timber post inside, drill boles through the post and fix the post to the socket with bolts and nuts. offer can be made for both without and with bolts and nuts upon repuest.
(2)  Wedge Grip:this system requires no nails or screws,when the timber post hammered inside the socket,it cuts into timber and holds it in a vice-like grip.the other advantage is it support timber widths varying by as much as 4mm.
(3)  Twin-bolt-A: this twin bolt heavy duty system makes the post nstallation and replacements more easier, it is strong enough to withstand gale force winds.
(4)  Twin-bolt-B:This new jointly designed and patented by Hebei Minmetals Co.,Ltd. Has many advantages. Besides same as Twin-bolt-A, this system also has the follwoing:
(A)  The special  Tee-bolts cannot revolve so the nuts can  be tightened very easily with a single spanner.
(B)  All four faces of the socket can be abutted by a fence panel.
(C)The right-angle locating tooth inside holds the base of the fence post
laterally and eliminates any possibility of post waggle under windload

SCREW-IN ANCHOR; SCREW-IN EARTH SLEEVES; POLE GROUND PLATE;POLE GROUND PLATE FLUSH;POLE ANCHOR;REPAIR SPUR;POST EXTENDER;ETC

  • Material:Steel
  • Type:Pole Anchor
  • Place of Origin:Hebei China (Mainland)
  • Country:China (Mainland)
  • telephone:86-0311-85202811
Material: Steel
Type: Pole Anchor
Place of Origin: Hebei China (Mainland)
*Your name:
*Your Email:
*To:Hebei Minmetals Co., Ltd.
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

NB1CB2 Glass Railing/Curb Anchor (PATENT NO. 10,501,939)

Nill Building Solutions has revolutionized the flange that has been in use for decades by roofers worldwide by making it stronger, waterproof, and eliminating common trouble areas while improving on efficiency. Various sizes available to suite your needs. The NB1CB2 is ideal ...

Come From Nill Building Solutions

NB1CB Patented Glass Railing/Curb Anchor (PATENT NO. 10,501,939)

Nill Building Solutions has revolutionized the flange that has been in use for decades by roofers worldwide by making it stronger, waterproof, and eliminating common trouble areas while improving on efficiency. Various sizes available to suite your needs. The NB1CB is ideal for ...

Come From Nill Building Solutions

NB12 OUTSIDE ANGLE ANCHOR MOUNT (PATENT NO. 11,591,799)

The Nill Building Solutions Outside Angle Flange can be used to mount attachments around the edge of your project. Various sizes available for your application. This product is ideal for installation of GLASS RAILINGS and much more. Product Features: PATENT No. 11,591,799 90 ...

Come From Nill Building Solutions