WEDGE ANCHOR

SUGGESTED SPECIFICATIONS: Wedge anchors shall be a threaded stud with an integral cone
expander and a single piece expansion clip. The stud shall be carbon steel with a minimum
70,000 psi tensile strength, or type 303, 304 or 316 stainless steel, as called for on the drawings.
Anchors shall meet Federal Specification AA1923A, Type 4.

FINISH: Carbon steel anchors are available zinc plated or mechanically galvanized.

Critical and Minimum Edge Distance and Spacing.

Combination Tension and Shear Loads.

TEST CRITERIA: The anchor has been tested in accordance with ICBO's Acceptance
Criteria for Expansion Anchors in Concrete and Masonry Elements (AC01). ICBO report
ER-3631 recognizes the WedgeAll for the following:

CODES: ICBO ER-3631; SBCCI 9706; City of L.A. RR24682; Dade County 010820.06; Factory Mutual
1M6AO.AH; Underwriters Laboratories File Ex3605; multiple DOT listings. Meets requirements
of Federal Specifications AA1923A, Type 4. The Load Tables list values based upon results 
from the most recent testing and may not reflect those in current code reports. Where code
jurisdictions apply, consult the current reports for applicable load values.

Most sizes feature full thread for added versatility.

Threaded end is chamfered for ease of starting nut.

One piece wrap around clip.

WEDGE ANCHOR SPECIAL FEATURES:

Wedge anchors are a non-bottom bearing, wedge style
expansion anchor for use in solid concrete
or grout filled masonry.