sleeve anchor

   

 

Frequently Asked Questions

6. Use wrench to set sleeve anchor by turning nut 3 to 4 full turns.

5. Turn nut until finger tight.

4. Insert anchor through fixture into hole in base material until washer and nut are tight against the fixture.

3. Set the nut flush with the top of the sleeve anchor.

2. Clean hole of all debris.

1. Drill hole same diameter as anchor diameter and 1/2 to 1 deeper than expected embedment.

Sleeve anchor can be installed in six easy steps. These concrete fasteners are pre-assembled to make installation quick and easy. A sleeve anchor has strong holding power and a heavy-loading capacity. Concrete anchors can be installed in brick, block, or concrete and work best in medium to heavy-duty capacities. This type of fastener can be used in any hole depth and pre-spotting is not necessary. Step by Step Anchor Installation Instructions follow:
        

Concrete anchor

Dynabolt

Bolt sleeve anchor

Sleeve all

Lock bolt

Masonry anchor

Thunderbolt

Lok bolt

Block anchor

Sup-r-sleeve

Also known as:

 

Features of sleeve anchors:

 

Medium to heavy-duty fastening into solid concrete. Dead loads only.

Applications:

Block

Brick

Concrete

Use with the following base materials:

 

sleeve anchor
Available in hex head and six other head styles
Available 1/4 - 3/4" diameter up to 6-1/4" length